175Z7368 Danfoss
Wake Industrial LLC is not an authorized distributor of this product.
MPN: VLT6032GT4CN1STR0DLF00A00C0
The Danfoss 175Z7368 is an HVAC drive from the VLT 6000 HVAC Drives series with a power rating of 22 kW or 30 HP and a voltage range of 380 to 460 VAC. This standard unit features a compact NEMA 1 enclosure and comes with a Local Control Panel display.
Internal Product Review
The 175Z7368 is a Danfoss VLT 6000 HVAC drive built for 380-460 VAC operation and a 22/30 kW/HP rating. A Local Control Panel and compact NEMA 1 enclosure support straightforward commissioning and clean panel integration, making the drive a dependable HVAC choice.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The 175Z7368 is a variable frequency drive built by Danfoss for the VLT 6000 HVAC Drives series. Installed between the utility supply and an induction motor, it adjusts output frequency so building automation controllers can match fan or pump speed to real-time air-handling or chilled-water demand. This arrangement can lower electrical consumption and reduce mechanical wear in commercial ventilation, heating, and cooling systems. The drive is intended for systems that operate continuously in industrial automation environments.
The drive’s power section is rated at 22 kW (30 HP), indicating the continuous mechanical output available to a connected motor under nominal conditions. It accepts a three-phase input of 380–460 VAC, matching common low-voltage distribution systems in North American and international facilities. Its Compact NEMA 1 enclosure supports cabinet mounting in clean indoor locations where basic protection against accidental contact is sufficient. Parameter entry and local start-stop commands are available through an included LCP, eliminating the need for a separate keypad during setup and normal operation. The unit is supplied without an integrated filter, so an external RFI filter may be necessary when the installation must satisfy stricter electromagnetic compatibility requirements.
The drive is delivered in a standard configuration, with control terminals, relay outputs, and analog references that follow the base VLT 6000 feature set. Its power module uses uncoated circuit boards, so the installation area should be free of corrosive airborne contaminants and excessive moisture. The fieldbus connector and application option port do not include optional communication or application modules. Network communication therefore requires a compatible external or add-on interface when it is needed by the control system. Specialized application functions must likewise be provided through suitable supporting equipment or available drive settings. The Graham application profile remains available for systems that use this predefined motor-control configuration through the drive menu.
