175Z7359
Wake Industrial LLC is not an authorized distributor of this product.
MPN: VLT6008GT2CN1STR0DLF00A00C0
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
-
In-Stock, Ships 1-2 Days
The 175Z7359 is an advanced HVAC drive manufactured by Danfoss. As part of the VLT 6000 HVAC Drives series, it supports an input voltage of 200-240 V AC and operates at a supply frequency of 50/60 Hz. The drive achieves a maximum efficiency of 96% and features electronic motor overload protection.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The 175Z7359 Frequency Converter ensures stable operation with controlled output power and current capacity. The unit supports HVAC and industrial applications requiring dependable performance. It maintains operational safety and system reliability across varied environments with protective earthing measures and optimized electrical connections.
The 175Z7359 frequency converter provides an output current of 24.2 A. It supports an overload output current of 26.6 A for 60 seconds. The pre-fuse recommendations are 30 A or 50 A depending on protection requirements. The control cables and communication cables must be fitted with clamps at both ends. This ensures the best possible electrical contact and reduces electrical interference. The frequency converter is rated to deliver an output power of 10.1 kVA at an input voltage of 240 V with a typical mechanical output of 5.5 kW at the shaft. This converter is designed for optimal performance with a maximum allowable cable cross-sectional area of 16 mm² for connections to the motor or DC bus. This ensures efficient power transmission while maintaining safe operating limits for both current capacity and thermal management. The converter can control several motors connected in parallel. When connected, the total motor current must not exceed the rated output current. The motors can operate at different rated rpm values if their rpm ratios remain constant.
The earth leakage current of the Danfoss 175Z7359 frequency converter may exceed 3.5 mA. Therefore, the converter must always be earthed in accordance with national and local electrical regulations. The earth cable must have a minimum cross-section of 10 mm² to ensure good mechanical connection. An RCD can be installed to cut off supply if leakage current exceeds safe limits. These specifications provide secure operation, flexible motor connection and safe power handling.
Frequently Asked Questions about 175Z7359:
Q: How does the Danfoss 175Z7359 Frequency Converter maintain stability during demanding motor operations?
A: It regulates output power with precise current handling to ensure consistent performance. Protective earthing and optimized wiring connections provide operational safety in HVAC and industrial environments.
Q: What considerations arise when connecting multiple motors to the 175Z7359 frequency converter?
A: The converter allows parallel motor operation while maintaining constant rpm ratios across different motors. Total motor current must always remain within rated output limits for reliable function.
Q: Why is protective earthing critical for the Danfoss 175Z7359 Frequency Converter?
A: Its leakage current may exceed 3.5 mA, demanding secure grounding for safe operation. A minimum 10 mm² earth cable ensures both mechanical strength and regulatory compliance.
Q: How does the 175Z7359 Frequency Converter manage electrical interference in sensitive installations?
A: Control and communication cables must be clamped at both ends to reduce noise. This design ensures stable signal transmission and enhances long-term electrical reliability in industrial systems.
Q: What integration challenges should engineers consider when installing the Danfoss 175Z7359 Frequency Converter?
A: Input and motor-side connections require correct cable sizing to avoid overheating. Recommended pre-fuse ratings also support safe integration with diverse electrical protection strategies.
