175Z7053 Danfoss
Wake Industrial LLC is not an authorized distributor of this product.
MPN: VLT6011HT4C54STR3DLF00A00C0
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The Danfoss 175Z7053 is part of the VLT 6000 HVAC Drives series and is designed for HVAC applications. It features a compact IP54 enclosure, a built-in local control panel, and operates at a power rating of 7.5 kW or 10 HP. This standard unit includes Class A1 and B RFI filters and supports an input voltage range of 380 to 460 VAC.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The 175Z7053 is an AC variable-frequency drive built by Danfoss for the VLT 6000 HVAC Drives series. It regulates fan and pump motors in ventilation, heating, and cooling plants so that air or water flow matches real-time demand instead of remaining at a fixed rate. By altering the frequency and voltage sent to the motor, the drive lowers energy use, reduces mechanical wear, and improves temperature control in large buildings and industrial processes. The variable-speed operation also reduces the need for dampers or control valves to regulate flow mechanically.
Electrical integration starts with a three-phase input range of 380–460 VAC, allowing the drive to connect directly to common industrial mains without a transformer. At the output stage, it can continuously deliver 7.5 kW / 10 HP of motor power under nominal operating conditions. The electronics sit inside a compact IP54 enclosure that resists dust ingress and splashed water, enabling wall mounting in utility corridors. In electrically noisy environments, the embedded EMC network uses a Class A1 and B filter to limit conducted emissions. Local interaction is handled through an included LCP, which provides parameter access and manual start/stop control without requiring an external control panel.
The 175Z7053 is supplied as a standard unit without application-specific extensions installed. Its control electronics have no protective coating, so the drive should be installed outside corrosive or high-moisture areas. The communication slots have no fieldbus modules installed, so speed references and control commands rely on hardwired analog or digital I/O. The functional profile supports HVAC operation, with acceleration ramps, PID regulators, and sleep functions configured for typical fan and pump loads. These control functions allow the drive to respond to pressure, temperature, or flow signals from connected sensors. Appropriate ventilation and installation clearances should be maintained around the enclosure to support heat dissipation during continuous operation.
