175Z4159 Danfoss
Wake Industrial LLC is not an authorized distributor of this product.
MPN: VLT5032PT5C54STR3DLF00A00C0
The Danfoss 175Z4159 is part of the VLT 5000 Frequency Converters series and features a compact IP54 enclosure with a display unit supplied. This converter supports a three phase supply voltage of 380 to 500 V and delivers 30 kW power at 110 percent torque and 22 kW at 160 percent torque. It comes with process control card control type, standard hardware, and Class A1 and B RFI filter performance.
Internal Product Review
The 175Z4159 is a Danfoss VLT 5000 frequency converter built with a process control card and a compact IP54 enclosure. Operation on 380-500 V three-phase supply and 30 kW output at 110% torque gives the unit strong flexibility for industrial drive applications. A well-executed converter for stable process control and dependable installation performance.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The 175Z4159 is a frequency converter produced by Danfoss as part of the VLT 5000 Frequency Converters series. It converts fixed three-phase mains power into a variable output that matches motor speed to process demand. Through closed-loop torque control, the product serves material-handling systems, HVAC equipment, and continuous manufacturing lines. Installed between the power panel and the motor, it can reduce mechanical wear and energy use while maintaining repeatable motion profiles under changing load conditions.
The mains input accepts a 380–500 V three-phase supply, allowing direct connection to common industrial power systems without step-up transformers. In applications requiring 110% overload capacity, the converter delivers 30 kW of shaft power and supports moderate torque peaks. The housing uses a compact IP54 enclosure, which protects the internal components against dust and splashing water when the unit is installed on the production floor. Control logic is implemented by a process control card that provides analog reference handling and setpoint scaling without external modules. Radio-frequency interference is attenuated by an integrated Class A1 and Class B filter, reducing conducted emissions that could otherwise travel through upstream wiring and affect nearby electrical equipment.
For higher starting loads that momentarily reach 160% torque, the converter provides 22 kW of motor output, allowing the connected motor to accelerate heavy loads without exceeding the applicable rating. Parameter access is provided through a supplied display that presents real-time current, frequency, operating status, and fault codes on the front panel. The converter uses uncoated circuit boards, which are suitable for controlled environments where humidity, dust, and airborne contaminants remain within the permitted operating limits. The unit has no fieldbus option, so commands and reference signals enter through hardwired terminals rather than a digital industrial network. This connection arrangement supports installations that use discrete inputs, relay outputs, or analog control loops for communication with the surrounding automation system.
