175Z0137 Danfoss
Wake Industrial LLC is not an authorized distributor of this product.
MPN: VLT5004PT5C20STR3DLF00A00C0
The Danfoss 175Z0137 is a frequency converter in the VLT 5000 Frequency Converters series and features a compact IP20 enclosure with a display unit supplied. It supports a three-phase mains voltage of 380-500 V, offers process control card operation, and delivers a power size of 3.0 kW at 110% torque. The unit is equipped with a Class A1 and B RFI filter and includes non-coated boards.
Internal Product Review
The 175Z0137 is a Danfoss VLT 5000 frequency converter built with a process control card and a compact IP20 enclosure. Support for 380-500 V three-phase supply and Class A1/B RFI filter performance makes this unit a strong choice for clean, dependable drive control.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The 175Z0137 is a frequency converter produced by Danfoss for the VLT 5000 Frequency Converters series. It converts fixed-frequency factory mains power into a regulated output that allows pumps, fans, or conveyors to run at the speed demanded by the process. By combining power electronics with a dedicated control section, the unit supplies variable voltage and frequency to standard induction motors. This design allows operators to reduce energy consumption, start loads smoothly, and maintain consistent torque under changing mechanical conditions.
The drive employs a process control card to execute speed and torque commands and accepts a 380–500 V three-phase supply, covering common industrial power systems. A continuous rating of 3.0 kW at 110% torque and a reduced rating of 2.2 kW at 160% torque allow the same chassis to support different overload profiles. The unit has a space-saving Compact IP20 enclosure, so it can be mounted inside a ventilated panel without an additional cover. For conducted emissions, the integrated filter is classified as a Class A1 and Class B filter, supporting compliance with applicable general-purpose and residential EMC limits. The printed circuit boards have uncoated surfaces, which makes the drive suitable for clean-air locations. Because the converter has no fieldbus option, hardwired I/O or analog references must be used for remote setpoints and status signals.
A front-mounted operator panel with a supplied display provides local access to operating parameters and drive status. The standard hardware build does not include special thermal or mechanical reinforcements. The converter has no built-in application option for dedicated pump, HVAC, or positioning functions, allowing the required features to be selected through software parameters. Its compact enclosure supports installation in control panels where available space is limited. Local controls also provide direct access to settings during initial setup and routine operation without requiring a separate display device.
