175Z0132 Danfoss
Wake Industrial LLC is not an authorized distributor of this product.
MPN: VLT5003PT5C20SBR3DLF00A00C0
The Danfoss 175Z0132 is a frequency converter in the VLT 5000 Frequency Converters series and features a process control card with a display unit supplied. It is designed for a three-phase 380-500 V supply, supports 2.2 kW at 110% torque, and comes with a compact IP20 enclosure. This model has non-coated boards, includes a standard brake chopper, and provides RFI filter performance at Class A1 and B levels.
Internal Product Review
The 175Z0132 is a Danfoss VLT 5000 frequency converter with a process control card and supplied display unit. A compact IP20 enclosure and standard brake chopper give this model solid practicality for controlled industrial drive installations. Support for 380-500 V three-phase supply and 2.2 kW at 110% torque makes this unit a strong choice for dependable process-drive performance.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The 175Z0132 is an AC frequency converter produced by Danfoss for the VLT 5000 Frequency Converters series. As a variable-speed drive, it modulates the output frequency supplied to three-phase induction motors, allowing pump, fan, or conveyor speed to match real-time load demands and reduce unnecessary energy use in industrial automation systems. The converter employs a process control card, allowing analog setpoints and digital I/O to connect directly to PLCs without additional interface modules. This direct connection supports centralized commands and status monitoring while reducing the amount of separate control hardware required within the installation.
The converter accepts a three-phase mains voltage range of 380–500 V, covering common low-voltage power networks used in manufacturing plants. It delivers up to 2.2 kW for applications requiring 110% torque, making this output suitable for loads with moderate acceleration demands. For applications requiring 160% torque during short acceleration peaks, the available output is up to 1.5 kW. These two overload classes accommodate different combinations of continuous power and temporary torque without requiring a separate drive platform. The unit uses a compact IP20 enclosure, which protects against accidental contact with internal electrical parts but does not provide protection from water. The converter must therefore be installed inside a suitable electrical cabinet with sufficient ventilation and clearance around the housing.
The drive has a standard configuration with a brake chopper, which directs regenerated energy to an external braking resistor and helps prevent DC-link overvoltage during rapid deceleration. A supplied display on the front panel shows operating values such as speed, current, and fault codes without requiring an external interface. The unit uses uncoated control boards, so installation should avoid corrosive atmospheres and excessive airborne contamination that could affect exposed electronic components. For electromagnetic compatibility, the built-in Class A1 and B RFI filter reduces conducted radio-frequency interference on the mains connection. This filtering supports installation on appropriate commercial and light-industrial power systems where electrical noise must remain within the applicable limits.
