195N6829
Wake Industrial LLC is not an authorized distributor of this product.
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The 195N6829 is a 2.1 Kg industrial drive with 96% efficiency and IP20 enclosure protection. Manufactured by Danfoss as part of their VLT 2900 Industrial Drives series, it operates at a supply voltage of 3 x 380-480 V ±10% at 50/60 Hz. The drive features thermal and short-circuit protections with a maximum output current of 5.9 A.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The Danfoss 195N6829 is a small and powerful industrial drive from the VLT 2900 Industrial Drives family. It can generate a maximum output current of 3.7 amps at a supply voltage of 380–415V. This drive is just 2.1 kilograms and has an exceptional efficiency rating of 96%. It can reliably regulate motors for a variety of light- to medium-duty industrial tasks. Its IP20-rated case protects it from solid objects and may be used in control panels or electrical enclosures. The 195N6829 can output frequencies from 0.2 to 132 Hz, which lets users adjust the speed of motors that are linked to it.
It is feasible to put the units next to each other, but they need to have 10 cm of space above and below them to stay cold. It is easy to install mechanically since there are clear drilling instructions and four screws and a decoupling plate for the power wires that make it strong. To install the electricity, users need to connect the mains supply to terminals 91, 92, and 93. The earth connection is established at terminal 95. Use screened or armored cables for the motor connections (U, V, W) to make sure they are properly grounded and work with other electronics. The built-in control panel makes it easy for users to program the drive. Users may change important settings by pressing the [QUICK MENU] key and then the [+] and [-] buttons.
To confirm the changes, press [CHANGE DATA]. Users should set the motor's settings, such as its voltage, frequency, current, and rated speed, according to the information on its nameplate. The drive stores changes to parameters automatically, even if the power goes off.
Frequently Asked Questions about 195N6829:
Q: What is the supply voltage range for the 195N6829?
A: The supply voltage is 3 x 380-480 V ±10%, operating at 50/60 Hz.
Q: What type of enclosure does the 195N6829 have?
A: This model features an IP20 enclosure, providing basic protection against solid objects larger than 12.5 mm but no protection against liquids.
Q: What is the typical power output of the 195N6829 at 400 V?
A: The typical power output at 400 V is 2.6 kVA.
Q: What is the maximum output current for the 195N6829 at 380-415 V?
A: The maximum output current is 3.7 A for continuous operation within the 380-415 V range.
Q: What is the maximum output current for short-term operation (60 seconds)?
A: For up to 60 seconds, the maximum output current increases to 5.9 A, allowing for temporary overloads.
