195N2196 Danfoss
Wake Industrial LLC is not an authorized distributor of this product.
MPN: VLT2940PT4B20STR0DBF00A21C1
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The Danfoss 195N2196 is part of the VLT 2900 Industrial Drives series and provides a shaft output of 4.0 kW with an output power of 6.3 kVA. It offers 5 digital inputs, 1 analog current input, 1 analog voltage input, 1 analog output, and 1 relay output. The drive features an IP20 enclosure and weighs 3.7 kg.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The 195N2196 is an AC variable frequency drive built by Danfoss for the VLT 2900 Industrial Drives series. It converts fixed-frequency, three-phase mains power into a controllable output that regulates induction motor speed in conveyors, pumps, and general process equipment. The cabinet-mounted converter provides electronic motor control without mechanical throttling, supporting higher system efficiency and tighter process tolerances in industrial automation. Its adjustable output allows connected equipment to operate at the speed required by changing process demands rather than continuously running at full speed.
The drive is housed in an IP20 enclosure, so it is intended for installation inside a protected panel. Electrical efficiency reaches 96%, meaning only 4% of the input power is lost as heat under rated conditions. The drive requires a nominal line current of 8.1 A, and the inverter can continuously deliver 9.1 A to the motor terminals. Its motor shaft output is rated at 4.0 kW, making the drive suitable for moderate-power industrial loads. One analog current input, one analog voltage input, and one analog output support proportional commands and feedback signals. Five digital inputs accept discrete commands for functions such as starting, direction selection, or preset speed control. A changeover relay contact can transmit ready or fault states to external control equipment. A true power factor of 0.90 limits reactive demand on the supply, while the 3.7 kg assembly can be installed without heavy structural support.
For transient loads, the inverter supplies 14.5 A for up to one minute before thermal protection intervenes. Its total apparent output is 6.3 kVA, which supports appropriate transformer and cable selection. Internal power dissipation is limited to 200 W, allowing the panel ventilation system to be sized for the heat released during operation. The power stage withstands symmetrical short-circuit currents up to 100,000 A when protected by correctly rated fuses or circuit breakers. This short-circuit capability supports protective coordination in industrial electrical systems with high available fault current. The relay contact may also control an external cooling fan when additional cabinet airflow is required.
