195N1114 Danfoss
Wake Industrial LLC is not an authorized distributor of this product.
MPN: VLT2880PT4B20SBR0DBF10A00C0
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The Danfoss 195N1114 is part of the VLT 2800 Low Voltage Drives series and features a power rating of 1.1 kW and 1.5 horsepower. It has an IP20 / NEMA 1 enclosure and provides a maximum output current of 24 Amps with five digital inputs. This unit weighs 18.5 kilograms and supports a maximum cable size of 16 mm² or 6 AWG.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The 195N1114 is an AC variable-frequency drive manufactured by Danfoss for the VLT 2800 Low Voltage Drives series. This converter accepts three-phase mains power and modulates output frequency to control the speed of induction motors used in conveyors, pumps, and other industrial machinery. By varying motor speed electronically, the unit supports energy savings, torque regulation, and precise process control within automated production lines. Its adjustable output allows connected machinery to operate at the speed required by each process rather than running continuously at full speed.
The continuous power output is rated at 1.1 kW, which corresponds to 1.5 HP at the motor shaft. Conversion efficiency reaches 97%, helping limit thermal losses during operation. On the line side, the drive draws a nominal 24.0 A, yet it can accept transient demands up to 38.4 A during acceleration. Five digital inputs allow direct start, stop, speed reference, and fault reset commands from PLCs or relay logic. The control electronics coordinate these commands with the inverter bridge to regulate the connected motor. Power enters through dedicated terminals and is processed without an internal radio-frequency interference filter.
The open chassis has an enclosure rating of IP20 / NEMA 1, permitting installation inside a ventilated control cabinet. Motor current can reach 24 A, and the terminal block accepts downstream conductors up to 16 mm² or 6 AWG. Upstream protective devices must be rated at 50 A or less, while the drive withstands prospective fault currents of 100,000 A when protected by the appropriate upstream fuse. An integral DC braking circuit shortens stopping times without requiring external braking hardware. PROFIBUS DP support provides fieldbus communication with compatible automation controls. External electromagnetic compatibility measures may be added when the installation requires radio-frequency interference suppression. The assembly weighs 18.5 kg, which should be considered when selecting cabinet supports and mounting hardware.
