195N1102 Danfoss
Wake Industrial LLC is not an authorized distributor of this product.
MPN: VLT2875PT4B20SBR0DBF10A00C0
The Danfoss 195N1102 is part of the VLT 2800 Low Voltage Drives series and is designed for process applications. This bookstyle drive has a built-in display, a standard hardware setup with brake, and delivers 10 HP or 7.5 kW of power at 380-480V, 3 phase. It has an IP20 protection rating and does not include an RFI filter.
Internal Product Review
The 195N1102 is a Danfoss VLT 2800 low voltage drive configured for process applications with a built-in SLCP display. Standard brake hardware and 10 HP output support dependable motor control in demanding industrial service. IP20 protection makes the unit a strong choice for enclosed panel installations.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The 195N1102 is an AC variable-frequency drive produced by Danfoss for the VLT 2800 Low Voltage Drives series. Supplied under the VLT product group, this unit modulates three-phase mains power so control systems can adjust the speed of induction motors in process equipment. It is suitable for general-purpose industrial automation applications that require compact in-panel mounting and basic motion regulation.
The drive delivers a continuous mechanical output of 7.5 kW, allowing it to start and regulate midsize pumps, fans, and mixers. Its input section accepts 380–480 V ±10% at 50/60 Hz, so it can connect directly to common low-voltage plant networks without transformers. Operation on a three-phase supply stabilizes the DC link and minimizes ripple under dynamic loads. The housing carries an IP20 protection rating, which guards against finger contact but requires installation inside a cabinet when protection from dust or liquids is needed. No application option card is installed, and the electronics do not have a protective coating, making the drive suitable for controlled ambient conditions. The cabinet should provide adequate protection against airborne contaminants, condensation, and accidental contact with exposed electrical connections.
The mechanical outline uses a book-style format, allowing multiple drives to be installed side by side to conserve panel width. The drive has a standard configuration with a brake, meaning an integrated brake chopper manages regenerated energy during rapid deceleration. A built-in display (SLCP) on the front panel provides parameter access and real-time operating information without requiring an external interface. The RFI stage is supplied without a filter or EMC components, so external suppression devices must be added when conducted emissions require reduction. The unit uses the Process dedicated-application category and includes default parameter sets suited to continuous-duty flow and pressure control loops. These settings support operation in equipment such as pumps, fans, and mixers while allowing the connected control system to adjust motor speed for changing process demands.
