Product Description:

The 195N1098 low-voltage AC drive is manufactured by Danfoss and belongs to the VLT 2800 Low Voltage Drives series. Developed for industrial process panels, the unit converts fixed-frequency mains power into a variable output that lets three-phase induction motors start smoothly, run at a commanded speed, and decelerate under full control. By integrating torque regulation and ramp profiles, it supports conveyor, agitator, and pump duties without additional mechanical starters.

The power stage is rated for 7.5 kW, equivalent to 10 HP, so the drive can handle midrange motor frames used on small process lines. It accepts a supply of 380–480 V ±10% at 50/60 Hz from a plant bus and is designed for three-phase distribution, eliminating the need for single-phase derating. The integrated electronics sit behind an IP20 barrier that prevents accidental finger contact while allowing cabinet airflow. Internally, the control board uses the standard hardware configuration and supervises dynamic braking, enabling controlled stops as the attached motor slows down. These electrical ratings must be observed to maintain thermal stability and avoid nuisance trips under variable-torque loading.

The slim book-style enclosure fits densely in multi-drive racks and is cooled by ambient airflow. No conformal coating is applied, so the unit should be mounted in a clean, dry cabinet. A built-in display with an SLCP presents setpoints and alarms while providing local keypad control, and the lack of a fieldbus module suits installations that rely on hardwired I/O rather than network commands. The drive comes in a standard configuration with a brake, providing the braking transistor needed for quick deceleration. It is supplied with no integrated EMC filter, so external radio-frequency interference suppression must be added when sensitive instrumentation shares the same feeder.