195N1086
Wake Industrial LLC is not an authorized distributor of this product.
MPN: VLT2855PT4B20SBR0DBF00A00C0
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
-
In-Stock, Ships 1-2 Days
The Danfoss 195N1086 drive, part of the VLT 2800 Low Voltage Drives series, features an enclosure rating of IP20 for secure operation. It supports a maximum rated current of 16 Amps, a maximum voltage of 480V AC, and allows screened cable lengths up to 100 meters. The unit measures 200 x 90 x 152 mm.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The 195N1086 low-voltage drive produced by Danfoss displays its alarm and warning codes on an LED display. This drive is started using the START control key. The product tends to encounter different types of faults because of particles such as dust in the surrounding air. This device’s AC line potential is separated from its control, relay, and serial communication terminals. The unit’s control card features PELV isolation on a TN network if the maximum voltage between the ground and a phase is 300 Vrms. Its control card has one programmable pulse input. This drive supports a maximum 40 mm motor cable length if it is shielded or armored.
The product’s minimum ambient operating temperature with its rated data is 32 °F. This device offers electronic thermal motor protection against overload. The unit gets disconnected from the power supply when it has too high or too low intermediate circuit voltage. The card’s 24 VDC supply and the digital and analog outputs plus inputs share the same potential. This drive comes with its parameter description in the English language by default. The product allows some of its parameters to have a different value for each setup. This device supports automatic control of its internal fan. The unit should never be serviced when the power supply is active. Its free mounting position results in increased flexibility.
This low-voltage drive needs all its grounds to be connected for the least conductor impedance. The product’s installation using cable clamps helps to minimize high-frequency emissions. This device’s serial communication and control cables are attached with cable clamps. The unit uses KTS-R Bussmann fuses. Its output comprises an LC filter when the related motor lacks phase insulation.
Frequently Asked Questions about 195N1086:
Q: How many digits does the LED display of the 195N1086 drive highlight?
A: The LED display of the 195N1086 drive highlights six digits.
Q: What format does the warning, alarm, and status codes of the 195N1086 drive support?
A: The warning, alarm, and status codes of the 195N1086 drive support Hex format.
Q: What fuses is the 195N1086 drive equipped with?
A: The 195N1086 drive is equipped with Bussmann KTS-R fuses.
Q: Why is it important to remove the paint of the cabinet backplate at the point of contact with the 195N1086 drive?
A: It important to remove the paint of the cabinet backplate at the point of contact with the 195N1086 drive for low impedance.
Q: What is the AC voltage of the 195N1086 drive?
A: The AC voltage of the 195N1086 drive is 380 V to 480 V.
