195N1085
Wake Industrial LLC is not an authorized distributor of this product.
MPN: VLT2855PT4B20STR0DBF00A00C0
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
-
In-Stock, Ships 1-2 Days
The Danfoss 195N1085 belongs to the VLT 2800 Low Voltage Drives series and features a power rating of 5.5 kW. This panel-mounted drive is self-cooled, operates at input voltages of 3 x 380-480 V AC, and supports a frequency of 50/60 Hz. It has an IP20 enclosure protection and lacks an EMC filter for emission control.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The 195N1085 low-voltage drive delivered by Danfoss should be grounded properly. This drive’s ground leakage current is higher than 3.5 mA. The product’s terminal plug for the motor must not be removed with an active connection to the AC supply line. This device comprises an electronic thermal relay. The unit’s faulty electronics can cause the restart of a stopped motor. It portrays a 7 HP to 10 HP power rating. This drive has been sized at 10.5 x 6.5 x 5.5 inches.
The product features a NEMA 1 terminal cover. This device uses a fan for the cooling action. The unit must feature at least 4 inches of clearance at the inlet and outlet of its fan. Its grounding cables must be as short as possible. This drive is connected with the backplate of its control cabinet using its fastening bolts. The product’s control cables should either be shielded or armored. This device might encounter 50/60 Hz ground loops when long cables are used. The unit’s neutral and phase wires must be connected to the N and L1 terminals for a single-phase 220 V to 240 V input. Its electronic thermal relay cannot ensure motor protection when a parallel connection of several motors has been established.
This low-voltage drive supports a residual current system connection for enhanced protection purposes. The product supports the linking of its DC bus with that of other drives for load sharing by setting the appropriate parameter. This device features a protective plate that can be removed by sliding it downwards. The unit delivers serial communication through an RS-485 port. Its control card comprises a Sub D plug.
Frequently Asked Questions about 195N1085:
Q: How are the analog inputs of the 195N1085 drive isolated?
A: The analog inputs of the 195N1085 drive are galvanically isolated from other high-voltage terminals and the supply voltage.
Q: What is the resolution of the analog output of the 195N1085 drive?
A: The resolution of the analog output of the 195N1085 drive is 10 bits.
Q: What standards does the 195N1085 drive comply with?
A: The 195N1085 drive is UL Listed and cUL Listed.
Q: What causes damage to the control electronics of the 195N1085 drive?
A: Chemical processes because of aggressive gases in the surroundings causes damage to the control electronics of the 195N1085 drive.
Q: How are the warning and status codes of the 195N1085 drive displayed?
A: The warning and status codes of the 195N1085 drive displayed in Hex format.
