Product Description:

The 195N1076 is a low-voltage AC drive produced by Danfoss and supplied under the VLT 2800 Low Voltage Drives series. Designed for small to medium induction motors, the unit receives three-phase mains power and modulates the output frequency so machines can match motor speed to process demand. Its compact design suits ventilation, conveying, and pump installations where panel depth and wiring space are limited.

An enclosure rating of IP20 protects users against contact with live parts, but the drive must be mounted inside a closed cabinet if dust or moisture is present. Operating efficiency reaches 96%, so only 4% of the incoming power is converted to heat under nominal load. The inverter delivers 9.1 A of output current, which is sufficient to start and regulate standard four-pole motors that draw up to 8.1 A on the input side. Its 0.75 kW electrical power rating supports small motor-driven equipment used in commercial and industrial applications. For process feedback, the analog output provides 10-bit resolution, enabling drive status or motor speed signals to be reported to a PLC in 1,024 discrete steps.

Thermal load is limited by a full-load loss of 200 W, which simplifies cabinet ventilation calculations for densely packed enclosures. Upstream protection requires a pre-fuse rating of 20 A, and the power stage withstands prospective fault currents up to 100,000 A when coordinated with suitable circuit breakers. Machine interfaces include five digital inputs, an integral brake module, and a 24 V auxiliary supply capable of delivering 130 mA for sensor power. Electromagnetic compatibility is supported by an EN 55011-1A radio-frequency interference filter, while a true power factor of 0.90 keeps supply loading predictable. The drive weighs 3.7 kg, allowing it to be mounted on narrow backplates without additional structural support.