195N1075 Danfoss
Wake Industrial LLC is not an authorized distributor of this product.
MPN: VLT2840PT4B20STR1DBF00A00C0
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The Danfoss 195N1075 is part of the VLT 2800 Low Voltage Drives series and offers a power rating of 0.75 kW with a 1.0 HP output. This drive supports five digital inputs, one analog current input, and one analog voltage input, while featuring an IP20 enclosure and a weight of 3.7 kg. It delivers an input current of 8.1 A and a maximum output current of 14.5 A for up to 60 seconds.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The 195N1075 is an AC variable frequency drive manufactured by Danfoss for the VLT 2800 Low Voltage Drives series. By converting fixed-frequency mains power into a pulse-width-modulated output, the unit allows control systems to regulate motor speed and torque in pumps, small conveyors, and ventilation fans. Its compact frame allows installation inside crowded panels. Within an automation loop, the drive helps minimize mechanical wear while maintaining consistent process throughput.
This model has a continuous motor output of 0.75 kW, which corresponds to 1.0 HP and suits low-power machinery without unnecessary oversizing. Under rated conditions, the input side draws 8.1 A, while the inverter section can supply 9.1 A to the motor terminals. Short overloads are handled by permitting up to 13.0 A of line current and a maximum motor phase current of 14.5 A for 60 seconds, providing additional torque during acceleration. Electrical conversion efficiency reaches 96%, which limits thermal stress and reduces the amount of heat that must be removed from the enclosure. A 20 A prefuse protects upstream wiring from excessive current. The control board provides one analog current input, one analog voltage input, and five digital inputs, allowing a PLC to send speed references, start commands, and interlock signals directly to the drive.
An IP20 open-chassis enclosure allows the drive to be mounted inside a ventilated cabinet where protection against accidental finger contact is sufficient. Motor and incoming power leads accept conductors up to 4 mm², simplifying cable selection and connection preparation. The unit has a dry mass of 3.7 kg, which supports wall or DIN rail installation without additional bracing. Conductive heat paths inside the housing work with forced cabinet airflow to remove power-stage and control-board heat. Adequate spacing around the ventilation openings helps maintain airflow through the compact housing during continuous operation. The available analog and digital connections also reduce the need for separate interface hardware when the drive is incorporated into a basic machine control system.
