195N1047 Danfoss
Wake Industrial LLC is not an authorized distributor of this product.
MPN: VLT2815PT4B20STR1DBF30A00C0
The Danfoss 195N1047 belongs to the VLT 2800 Low Voltage Drives series and features a bookstyle enclosure with a built-in SLCP display. This drive operates at 2.0 HP, supports a mains voltage of 380 to 480 volts at 50/60Hz in a three phase setup, and has a power rating of 1.5kW. It comes with an IP20 protection rating and is equipped with a DeviceNet fieldbus option and EN 55011 Class A1 RFI filter.
Internal Product Review
The 195N1047 is a Danfoss VLT 2800 low voltage drive configured for process applications, with a built-in display that simplifies commissioning. DeviceNet fieldbus support and IP20 protection make the unit a strong choice for enclosed industrial control systems. The bookstyle enclosure and 2.0 HP rating give this drive excellent practical value for compact process installations.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The 195N1047 is a variable-frequency drive from Danfoss, delivered within the VLT 2800 Low Voltage Drives series. It converts fixed-frequency mains power into a modulated output so that motor speed and torque can be adjusted in real time on process equipment such as pumps, fans, and compact conveyors. This control function improves energy efficiency and reduces mechanical stress in industrial automation applications. The drive can regulate motor operation in response to changing process demands, reducing unnecessary power consumption when full output is not required.
The drive accepts an input of 380–480 V ±10% at 50/60 Hz, making it suitable for common industrial power networks. With a motor output of 1.5 kW, equivalent to 2.0 HP, it supports midsized actuators without requiring an oversized drive. The internal control board uses standard hardware, and no dedicated application option is installed, so the available parameter set supports general-purpose operation. A DeviceNet interface provides communication with higher-level control systems and distributed I/O without requiring an additional gateway. Conducted emissions are limited by the built-in EN 55011 Class A1 RFI filter, helping electrical panels meet applicable electromagnetic compatibility requirements. The unit is supplied without a conformal coating, which limits its suitability for areas containing airborne chemicals or persistent moisture. Its intended application area is process control, supporting proportional speed regulation for equipment with variable flow or output requirements.
The book-style housing stands upright and minimizes the amount of panel width needed for installation. The terminals are arranged for three-phase motor circuits, allowing the drive to supply compatible industrial motors. The product carries an IP20 protection rating, so it must be installed inside a closed electrical cabinet that prevents exposure to moisture and debris. A built-in display (SLCP) on the front panel shows speed, current, operating status, and alarm codes. The display also permits local parameter adjustments without requiring a separate programming tool. The internal grounding arrangement supports controlled heat dissipation and helps reduce electromagnetic interference when the drive is installed according to the applicable panel and wiring requirements.
