195N1030 Danfoss
Wake Industrial LLC is not an authorized distributor of this product.
MPN: VLT2811PT4B20SBR0DBF10A00C0
The Danfoss 195N1030 is part of the VLT 2800 Low Voltage Drives series and has a power rating of 1.1 kW with a 1.5 HP output. This three phase drive supports mains voltages from 380 to 480 V at 50/60 Hz and features a built-in display with standard hardware including a brake. Its enclosure is bookstyle and the unit has an IP20 protection rating.
Internal Product Review
The 195N1030 is a Danfoss VLT 2800 low-voltage drive designed for process applications and equipped with a built-in display. A 1.5 HP rating and 380-480 V input support stable performance in common industrial drive setups. The bookstyle enclosure with IP20 protection makes the drive a strong fit for clean panel installations.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The 195N1030 is an AC variable-frequency drive manufactured by Danfoss for the VLT 2800 Low Voltage Drives series. It regulates the speed of three-phase induction motors used in process automation lines, conveyors, and pump stations. By modulating output frequency and voltage, the unit matches motor torque to changing load requirements while maintaining a compact footprint in the control cabinet. This operating method can also reduce unnecessary motor speed when an application does not require full output.
The drive delivers a continuous mechanical output of 1.1 kW, which corresponds to 1.5 HP. The incoming mains voltage can range from 380–480 V at either 50 or 60 Hz. Its power section is designed for three-phase operation on supply networks commonly used in industrial facilities. The enclosure carries an IP20 protection rating, shielding the electronics from finger contact and medium-sized foreign objects while remaining open to cabinet airflow. Integrated thermal and electronic safeguards protect the drive and connected motor from harmful operating conditions. These features allow the unit to operate constant-torque loads throughout the stated input voltage range without requiring a separate protective enclosure inside a suitable cabinet.
The narrow book-style format enables dense side-by-side mounting inside standard control panels. Parameters and operating status are accessible through the built-in display (SLCP), eliminating the need for an external keypad during routine configuration and monitoring. The power stage uses a standard configuration with a brake, so its dedicated brake chopper helps manage regenerated energy during rapid motor deceleration. The unit is supplied with no EMC filter, making it suitable for installations where electromagnetic interference control is provided externally. Its printed circuit board assembly is uncoated, so the drive should be installed where the cabinet protects internal components from moisture and airborne contaminants. No application option is installed, leaving the available control parameters open for adjustments suited to the connected motor and process. The compact housing and integrated controls support installation where panel space is limited and local status visibility is required.
