195N1016 Danfoss
Wake Industrial LLC is not an authorized distributor of this product.
MPN: VLT2807PT4B20SBR1DBF00A00C0
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The Danfoss 195N1016 is a 1.0 horsepower, 0.75 kW drive from the VLT 2800 Low Voltage Drives series. It is a three-phase bookstyle unit with a built-in display and an IP20 protection rating. The drive operates at a mains voltage of 380-480V, features standard hardware with brake, and includes an EN 55011 Class A1 RFI filter.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The 195N1016 AC drive is produced by Danfoss for the VLT 2800 Low Voltage Drives series. This variable-frequency drive converts constant-frequency mains power into a modulated three-phase output, allowing motor speed to be adjusted in process lines, HVAC systems, and packaging equipment. Analog or digital reference signals control the output frequency, enabling the connected motor to follow changing process demands. Controlled acceleration and deceleration can also reduce mechanical shock during starts and stops, while the compact housing is suitable for space-limited control panels.
The drive accepts an input of 380 to 480 V, ±10%, at 50/60 Hz from an industrial three-phase power supply. Its motor output is rated at 0.75 kW, which corresponds to 1.0 HP for small pumps, agitators, conveyors, and similar machinery. The housing has an IP20 protection rating, so it prevents accidental contact with hazardous internal parts but does not provide protection against water. Installation inside a suitable enclosure is therefore necessary for normal industrial operation. An integrated radio-frequency interference network complies with EN 55011 Class A1 limits, helping reduce conducted electrical noise without requiring a separate filter. The drive regulates output voltage and frequency electronically, allowing the motor to operate across the speed range required by the application.
The housing uses a book-style format that permits dense side-by-side mounting in a control cabinet. A built-in display (SLCP) provides direct access to operating values and adjustable parameters from the front of the unit. This local interface allows speed references, acceleration ramps, motor data, and operating limits to be entered without a separate programming device. The drive has a standard configuration with a brake, enabling connection to a dynamic braking resistor when rapid deceleration is required. During deceleration, the braking circuit directs regenerated energy to the external resistor instead of allowing the DC bus voltage to rise excessively. Its process-oriented control configuration supports variable-speed applications in which motor output must respond to changing flow, pressure, or production requirements.
