195N1001 Danfoss
Wake Industrial LLC is not an authorized distributor of this product.
MPN: VLT2805PT4B20STR0DBF00A00C0
The Danfoss 195N1001 is a three-phase drive from the VLT 2800 Low Voltage Drives series with a power rating of 0.55 kW and a horsepower of 0.75 HP. It has a built-in display, operates at 380-480V AC, and features IP20 protection. The drive comes in a bookstyle enclosure without fieldbus or RFI filter options.
Internal Product Review
The 195N1001 is a VLT 2800 low voltage drive tuned for process applications, and the standard hardware configuration makes it a dependable choice for general industrial service. The built-in SLCP display simplifies commissioning, while the bookstyle enclosure supports neat cabinet integration. Three-phase 380 to 480 V input gives this unit strong compatibility with common industrial power systems.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The 195N1001 is a low-voltage AC drive produced by Danfoss for the VLT 2800 Low Voltage Drives series. It modulates three-phase mains power so induction motors can run at variable speeds in pump, fan, and conveyor applications common to industrial automation. When installed in a control panel, the compact drive provides motor regulation for process-oriented applications that require predictable torque and reduced inrush current. Its variable-frequency output allows motor speed to follow changing operating demands rather than remain fixed at the mains frequency.
This model supplies a continuous output of 0.55 kW, equivalent to 0.75 HP, allowing it to operate small and medium asynchronous motors within its rated capacity. The power section accepts a supply range of 380–480 V ±10% at 50/60 Hz, covering common European and North American low-voltage networks. The drive uses a three-phase input that balances loading across the incoming lines and minimizes current ripple. Local parameter entry is performed through the built-in display (SLCP), eliminating the need for an external keypad during routine setup and operation. The drive has a standard hardware configuration, with discrete control connections available through the terminal strip. This arrangement supports direct wiring of basic start, stop, reference, and status signals without requiring an additional control interface.
The book-style enclosure allows multiple drives to be mounted side by side while conserving space inside a control cabinet. Its IP20 rating provides basic protection against finger contact when the unit is installed in a closed control panel. The housing remains open enough for cabinet airflow to remove heat generated by the power electronics during operation. The drive is supplied without an RFI filter (no EMC), so an external filter is required where conducted-emission limits apply. It is intended for process applications and does not include application-specific or fieldbus options. The circuit boards are uncoated, so the surrounding cabinet should protect the electronics from excessive moisture, dust, and corrosive airborne contaminants. Power, motor, and control conductors connect through the drive terminals, supporting conventional panel wiring without a separate remote interface.
