Product Description:

195N0227 is a VLT 2800 series AC drive. Its manufacturer is Danfoss, a Danish supplier of premier automation solutions. The drive controls industrial motors by varying its output. A digital display and keypad on the front allow easy configuration and monitoring. The drive can be connected to single-phase or 3-phase AC mains. Range of compatible input voltages is 200 to 240 Volts. Its output is always 3-pahse at 200 to 240 Volts and the current output is 4.2 Amps, which can rise to 6.7 Amps for 60-second durations. Power output of the 195N0227 at 230 Volts is 1.7 kVA and the shaft output (typical) is 0.75 kilowatts (1 Horsepower). The cable cross-section for the motor cable should not be larger than 4 mm2 (10 AWG).

For single-phase input, the continuous input current is 10.6 Amps and the 60-second peak current is 16.7 Amps. For three-phase input, the continuous input current is 5.1 Amps and the 60-second peak current is 8.2 Amps. The cable cross-section for AC line input should not be larger than 4 mm2 (10 AWG). Efficiency of the drive unit is 95%. It loses 48 Watts at peak load. The drive has an IP20 housing that weighs 2 kilograms. Drives from the VLT 2800 series are cUL and UL listed. There are 5 programmable digital inputs on the drive control card with 0 to 24 Volts DC range. There is also a single analog voltage input on the control card with 0 to 10 Volts DC range. The single pulse input on the control card can accept 4 to 67 kilohertz frequencies. Current range for the single analog output on the card is 0/4 to 20 milliamps.