195N0076 Danfoss
Wake Industrial LLC is not an authorized distributor of this product.
MPN: VLT2840PT2B20SBR1DBF00A00C0
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The Danfoss 195N0076 is part of the VLT 2800 Low Voltage Drives series and features an output current of 16 A with a power rating of 0.75 kW. This drive operates at 1.0 horsepower, has a maximum input current of 23.5 A, and an input current of 14.7 A. It includes an integral brake module, has one analog voltage and one analog current input, five digital inputs, and is housed in an IP20 enclosure.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The 195N0076 is a low-voltage AC drive produced by Danfoss as part of the VLT 2800 Low Voltage Drives series. It serves as the motor control element in compact automation panels, converting fixed-frequency mains power into a variable-frequency output suitable for process control. The drive contains an integral brake chopper to dissipate regenerated energy, and its control terminals support analog and digital commands for straightforward connection to PLCs and process sensors.
The rated mechanical output is 1.0 HP, equivalent to 0.75 kW of continuous shaft power under nominal operating conditions. The input circuit draws 14.7 A at full load, while the inverter section can deliver 16 A of RMS current to the motor terminals, making the drive suitable for small IEC-frame induction motors. With an electrical efficiency of 95%, the drive limits the amount of input energy converted into heat. The internal cooling path removes this heat, supporting operation at rated output without thermal derating. Control connections include one analog current input, one analog voltage input, and five digital inputs that accept 24 V logic. A built-in 1 A RFI filter attenuates conducted electrical noise to support compliance with typical plant electromagnetic compatibility requirements.
For protective coordination, the maximum supply input demand should not exceed 23.5 A, and the recommended upstream fuse rating is 25 A. This fuse rating allows the branch protection device to clear electrical faults while reducing the likelihood of nuisance trips during normal operation. The chassis dissipates 231 W as heat, which should be considered when sizing panel ventilation and arranging nearby equipment. The steel housing has an IP20 ingress protection rating, so the drive is intended for installation inside a clean, dry indoor enclosure that prevents access to hazardous internal components. One relay output provides programmable status signaling to external control equipment, and the assembled unit weighs 6.0 kg for mounting purposes.
