195N0051
Wake Industrial LLC is not an authorized distributor of this product.
MPN: VLT2815PS2B20STR1DBF00A00C0
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
-
In-Stock, Ships 1-2 Days
The 195N0051 drive boasts an output power of 2.6 kVA at 400V, a typical shaft output of 1.5 kW (2 HP), an input current of 3.2 A, and an efficiency of 96% at full load. As part of the VLT 2800 Low Voltage Drives series by Danfoss, it features IP20 enclosure protection and weighs 2.1 kilograms.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The Danfoss 195N0051 is a compact and lightweight frequency converter. Weighing just 2.1 kg, this drive delivers a shaft output power of 1.5 kW (2 HP) and is housed within an IP20-rated enclosure, making it suitable for installation within control cabinets or panels. One critical safety consideration for the 195N0051 is its leakage current, which exceeds 3.5 mA. It is essential that the equipment is correctly grounded by a certified electrical installer to prevent the risk of electric shock, serious injury, or death. Proper grounding ensures the safe dissipation of leakage currents and complies with relevant safety regulations. Overcurrent protection is also vital to prevent overheating and potential damage to installation wiring. All overcurrent protection should meet the requirements of national regulations.
The fuses used in the installation should be rated for circuits capable of supplying up to 100,000 Arms (symmetrical) at a maximum of 480 V. If UL/cUL standards are not required, Danfoss recommends selecting fuses as specified in product documentation, which ensures compliance with EN50178/IEC61800-5-1 standards. Deviating from these recommendations may result in equipment damage during a fault condition.
For variants VLT 2880-2882, the unit features an RFI (Radio Frequency Interference) switch, which should be configured based on the mains supply characteristics. When the drive is supplied by an isolated mains source (IT mains) or TT/TN-S systems with a grounded leg, the RFI switch should be set to OFF to protect the internal circuitry and reduce ground capacity currents, as prescribed by IEC 61800-3. For installations where optimal EMC (Electromagnetic Compatibility) performance is required, such as when connecting parallel motors or using motor cables longer than 25 meters, the RFI switch should be set to ON. This ensures that filter capacitors remain active, enhancing noise suppression.
Frequently Asked Questions about 195N0051:
Q: What product series does the 195N0051 belong to?
A: It belongs to the VLT 2800 series.
Q: What is the mains supply voltage supported by the 195N0051?
A: The drive supports a mains supply of 3 x 380-480 V AC.
Q: What is the standard output current (iinv) for this drive?
A: The standard output current is 3.7 A.
Q: What is the maximum output current for short durations (imax 60s)?
A: The maximum output current for 60 seconds is 5.9 A.
Q: What is the output power at 400 V for the 195N0051?
A: At 400 V, the output power is 2.6 kVA.
