Product Description:

The 195N0029 is an AC drive manufactured by Danfoss for the VLT 2800 Low Voltage Drives series. Installed between the mains supply and an induction motor, it converts fixed-frequency electrical power into an adjustable motor output. By varying the output frequency and voltage, the drive allows machinery in automated production lines to follow commanded speeds while reducing mechanical stress during acceleration and deceleration.

This model is rated for a mechanical motor output of 1.0 HP, corresponding to an electrical power rating of 0.75 kW. It is designed for three-phase grids with an input range of 200–240 V AC, allowing direct connection to common low-voltage industrial supplies. The slim book-style housing allows multiple units to be installed side by side without unnecessarily increasing cabinet width. Its IP20 protection level helps prevent accidental finger contact with live parts and limits the entry of larger debris. The unit is intended for installation inside a suitable electrical cabinet that provides the additional protection required by the operating area.

A built-in SLCP display on the front panel presents operating status, parameter values, and fault information for local setup and monitoring. The drive has no integrated EMC filter, so external radio-frequency interference mitigation may be required when conducted emissions must meet applicable limits. Its parameter arrangement supports process applications, including constant-torque equipment such as mixers and positive-displacement pumps. The circuit boards have no coating, making the unit most appropriate for controlled indoor locations that do not expose the electronics to moisture, corrosive vapor, or heavy airborne contamination. Additional application I/O and fieldbus cards are not installed in this configuration. The standard electronics provide the core motor-control functions without an added application option.