195N0015 Danfoss
Wake Industrial LLC is not an authorized distributor of this product.
MPN: VLT2805PS2B20STR1DBF00A00C0
The Danfoss 195N0015 is part of the VLT 2800 Low Voltage Drives series and has a power rating of 0.55 kW (0.75 HP). It features a built-in SLCP display and is designed for single-phase operation with a mains voltage of 200-240V AC. This drive has an IP20 protection rating and an EN 55011 Class A1 RFI filter.
Internal Product Review
The 195N0015 is a Danfoss VLT 2800 low voltage drive configured for process applications and rated at 0.55 kW. Single-phase 200-240V AC input supports straightforward integration in lighter-duty industrial panels. Built-in display access adds practical setup convenience, making 195N0015 a capable compact drive.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The 195N0015 is a variable-frequency drive manufactured by Danfoss and supplied through the VLT 2800 Low Voltage Drives series. It regulates the speed of small AC motors used in continuous-flow process lines and automated machinery. This control allows motor torque to follow changing demand, which can reduce unnecessary energy consumption during operation.
This model delivers a continuous output of 0.55 kW, equivalent to 0.75 HP. That capacity suits fractional-horsepower equipment such as dosing pumps, light conveyors, and other low-power motor loads. Input power is accepted from a 200–240 V AC single-phase supply, simplifying connection to standard 230 V branch circuits. The drive rectifies the incoming power and converts it into a variable-frequency output for controlled motor speed. Its enclosure carries an IP20 rating, providing protection against accidental finger contact when the unit is installed inside a clean electrical panel. No application option card is fitted, and the standard configuration supports basic open-loop speed regulation without additional input or output functions.
The housing uses a compact book-style format that allows multiple drives to be installed side by side in a shallow enclosure. Its narrow profile conserves panel space while keeping the front controls accessible. Conducted emissions are controlled by an internal filter that meets EN 55011 Class A1 requirements for industrial electrical systems. Local parameter access is provided through the built-in display (SLCP), which presents the setpoint, current, operating status, and fault codes on the front panel. These controls allow operating values and basic parameters to be viewed directly at the drive. The supplied configuration has no fieldbus option, so network commands are unavailable without an appropriate communication module. The housing is supplied without a conformal coating and is intended for clean, dry indoor panel environments where the electronics are protected from moisture and corrosive contaminants.
