178B1585
Wake Industrial LLC is not an authorized distributor of this product.
MPN: VLT2875PT4B20SBR1DBF12A00C0
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
-
Available
The 178B1585 drive features a nominal output current of 17 amps, a power rating of 7.5 kW (10 HP), an input voltage range of 3 x 380-480 V ±10%, and an efficiency of 96% at full load. As part of the VLT 2800 Low Voltage Drives series by Danfoss, it boasts an IP20 bookstyle enclosure and weighs 6.5 kilograms.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The Danfoss 178B1585 low-voltage drive offers a frequency converter operation. This drive facilitates a quick and EMI-correct installation process. The product deploys an air cooling action. This device allows the removal of its power terminals. The unit’s mains terminals need a mains power supply connection. It should be grounded properly because of its high leakage current of greater than 3.5 mA. This drive contains high voltage when connected to the power supply or during load sharing.
The product comes along with a decoupling plate that must be connected to its earth screw and power cables. This device’s incorrect installation can lead to physical injury or property damage. The unit’s parameters must be set only after pressing the Stop/Reset key to avoid an unintended start of the motor. Its motor and plugs are to be removed only after the mains supply has been disconnected. This drive’s Motor thermal protection parameter must be activated for protection against motor overload. The product supports the touching of its components and housing only after the voltage inputs have been disconnected from load sharing through the DC bus. This device has a six-digit display and the keys to change its parameters on its front panel. The unit’s manual initialization is possible after the mains voltage is disconnected. It highlights one operating data continuously on the display during normal operation.
This low-voltage drive’s Change Data key must be pressed to switch between Auto Mode and Hand Mode. The product’s Language parameter is used to choose the language on the display. This device’s parameters can be uploaded or downloaded in Stop mode. The unit is integrated into a control cabinet. It is meant to be connected to the backplate with fastening bolts for low impedance.
Frequently Asked Questions about 178B1585:
Q: What are the two operating modes of the 178B1585 drive?
A: The two operating modes of the 178B1585 drive are Auto mode and Hand mode.
Q: How many languages does the display of the 178B1585 drive support?
A: The display of the 178B1585 drive supports six languages.
Q: What is the minimum clearance distance for the 178B1585 drive in the control cabinet?
A: The minimum clearance distance for the 178B1585 drive in the control cabinet is 100 mm at the top and bottom.
Q: What parameter is used to set up the Quick Menu of the 178B1585 drive?
A: The Quick Menu of the 178B1585 drive is set up using the Quick Menu setup parameter.
Q: How can extra protection be ensured for the 178B1585 drive?
A: Extra protection can be ensured for the 178B1585 drive by implementing multiple protective earthing or using RCD relays.
