134G7013 Danfoss
Wake Industrial LLC is not an authorized distributor of this product.
MPN: VLT2822PT4B20SBR1DBF00A00C1
The Danfoss 134G7013 is part of the VLT 2800 Low Voltage Drives series and features a built-in display (SLCP) with a bookstyle enclosure. This 3 phase drive has a power rating of 2.2 kW or 3.0 HP and operates at 380-480V with a 50/60Hz mains voltage. The drive includes standard hardware with a brake, IP20 protection, and an EN 55011 Class A1 RFI filter.
Internal Product Review
The 134G7013 is a Danfoss VLT 2800 low voltage drive well-suited for process applications with a 3.0 HP rating. A built-in SLCP display and IP20 protection support efficient commissioning and dependable cabinet installation.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The 134G7013 is an AC drive produced by Danfoss for the VLT 2800 Low Voltage Drives series. It is intended for variable-speed control of three-phase induction motors in general process automation, where rapid installation and compact cabinet layouts are important. By modulating the motor’s input frequency and voltage, the unit allows pumps, fans, and conveyors to match load demand while reducing energy consumption and mechanical stress. This control method can also reduce the abrupt starts and stops that place additional strain on connected equipment.
This model delivers a continuous shaft output of 2.2 kW, equivalent to 3.0 HP, giving it adequate capacity for medium-sized auxiliary equipment in processing lines. The power section accepts a mains supply of 380–480 V ±10% at 50/60 Hz and supports three-phase operation, so it connects directly to common industrial feeders without transformers. An integrated brake chopper dissipates regenerated energy during rapid deceleration cycles. The drive carries an IP20 protection rating, which protects against accidental finger contact but requires installation inside a control enclosure in dusty or wet environments. The enclosure also keeps the power and control terminals accessible for organized panel wiring. Internal control electronics are protected against moisture and airborne contaminants that could otherwise affect operation in process environments.
Mechanical integration is aided by the book-style housing, which minimizes panel depth and permits side-by-side mounting with suitable airflow clearance. Conducted emissions are limited by the factory-installed RFI filter certified to EN 55011 Class A1, supporting use in industrial zones without an external filter. A built-in display (SLCP) provides local parameter entry and real-time status information, removing the need for a separate keypad during setup. Operators can use the local interface to review operating values, adjust motor-control parameters, and identify drive conditions directly at the enclosure. The conformal coating protects solder joints and electronic components when ambient humidity fluctuates. The drive is configured for process applications that require continuous speed regulation of equipment such as pumps, fans, and conveyors.
