131Z8848 Danfoss
Wake Industrial LLC is not an authorized distributor of this product.
MPN: VLT2875PT4B20SBR1DBF00A00C1
The Danfoss 131Z8848 is part of the VLT 2800 Low Voltage Drives series and has a power rating of 7.5 kW with a 10 horsepower output. This drive features a three-phase input, operates at 380-480V 50/60Hz, and comes in a bookstyle enclosure with IP20 protection. It includes a built-in display and coating, and is equipped with a standard hardware configuration with brake.
Internal Product Review
The 131Z8848 is a Danfoss VLT 2800 low voltage drive configured for process applications with a standard brake setup. The 10 HP and 7.5 kW rating make the unit a strong fit for steady industrial drive duty. IP20 protection and a built-in SLCP display round out a well-executed drive package for controlled cabinet environments.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The 131Z8848 is a low-voltage AC drive produced by Danfoss for the VLT 2800 Low Voltage Drives series. It varies the speed of three-phase induction motors used in process equipment, allowing pumps, fans, and conveyors to respond to changing operating demands. Adjusting motor speed can reduce electrical consumption and mechanical stress compared with systems that rely on constant-speed operation and mechanical throttling. Within an automation system, the unit functions as the final power stage commanded by upstream control logic through its available control terminals.
Input power spans 380 to 480 V AC ±10% on a three-phase supply, allowing the drive to connect directly to common industrial feeders without a transformer. At that line voltage, it delivers a continuous output of 7.5 kW, making it suitable for midsize centrifugal loads and comparable industrial machinery. An integrated brake chopper dissipates regenerated energy during rapid motor deceleration. The book-style construction limits cabinet depth while preserving the airflow required by the power electronics. A built-in SLCP display provides front-panel access to operating parameters and status information. Output switching interference is reduced by an internal EN 55011 Class A1 radio-frequency interference filter. The IP20 housing helps prevent accidental contact with hazardous internal components while allowing installation inside a suitable control cabinet.
The power section has a protective coating that shields its circuit boards from moisture and airborne contaminants. This treatment supports use in process applications where equipment may be exposed to humid air, dust, or chemical vapors. The drive is configured for process-duty profiles and is supplied without an application option, allowing operating sequences to be programmed through its standard parameters. No fieldbus interface is installed, so commands and feedback signals are exchanged through discrete and analog terminals. The available terminal controls support integration with external automation devices that provide speed references, start and stop commands, and basic operating status signals.
