Product Description:

The 195H6527 frequency converter, from the Danfoss VLT 2000 Frequency Converters family, packs a lot into a compact spot. The enclosure rating stands at IP20, so the internals are shielded from touch, and this helps on busy control panels where hands get close but real moisture isn’t much of a risk. Incoming voltages from 380 to 415 V stay under control here, with a max output current at 4.0 A, which suits machinery that needs steady speed and decent torque on tap. Sized at 170 x 110 x 180 mm, this drive slots into smaller enclosures or retrofits in setups where room is at a premium.

Protecting sensitive electronics gets some extra attention since this model includes both an RFI filter and another LC filter for extra noise suppression. That mix keeps electromagnetic interference in check—there’s less chance for nearby gear or sensors to act up. Cooling does its job on the inside, with the built-in fan taking heat away before parts get too warm. The max temp rating printed on the specs is 40°C (with full load), which makes sense for cabinet installs that aren’t air conditioned. The EMC protection claims meet IEC 801 Series and EN 55011 Group 1, Class A standards.

Weighing in at 1 kg, it’s actually quick to swap if needed, and the unscreened cable can be as long as 100 m before signal worries show up, handy for runs across wider factory floors. With no frequency limitation—marked “No Limit”—the drive leaves more flexibility for dialing in custom speeds. The industrial focus means this part spends most of its life dealing with pumps, conveyors, or precise automation systems and doesn’t usually call for much intervention once bolted in. Most times, the 195H6527 just keeps on pushing consistent performance, especially where reliability and tighter interference controls are critical.