195H6510

Product Description:

The 195H6510 unit from Danfoss is designed as part of the VLT 2000 Frequency Converters collection, shaped to support medium-sized machines and drives in industrial settings. This frequency converter works across both 208–240 V AC and 380–460 V AC ranges, with three-phase input making it useful for lines that see varied supply situations. The maximum rated load lets it push 3 x 7.5 A, enough for pumps, fans, and similar processes that cycle on and off often. Dimensions keep things sharp and compact at 100 x 110 x 180 mm, so the unit slips in where there is not much extra room between panels or inside control cases.

The chassis comes marked IP00, leaving it open for air flow but meaning other enclosure or placement covers need to be added to shield against dust or accidental bumps. Cable runs are generous—up to 300 meters unscreened or 150 meters screened—handy when panel and equipment have to sit far from each other on bigger plant floors. There is just a single coil at play inside, tuned with 75 uH inductance for smooth performance where sharp spikes could be a problem for sensitive automation. The design includes compatibility with the VLT 2010–2050 Series drives, which keeps system upgrades or spares simpler for maintenance planning down the line.

Wiring in or swapping out this converter doesn’t take much adjusting thanks to its screw terminals and easy-to-see size label right along the housing. The casing resists normal bumps but stays ready for low-profile cabinet settings where tight racks can cause issues for blockier gear. The maximum cable length allows system layouts to stretch without pushing spec limits, giving planners more options with installation. Maximum working temperature of 40°C takes it safely into most processing rooms and general automation hubs where things heat up but don’t go wild.