195H3401 Danfoss
Wake Industrial LLC is not an authorized distributor of this product.
The Danfoss 195H3401 is part of the VLT 2000 Frequency Converters series and operates as an AC drive with a power output of 0.75 kW. It features an IP20 enclosure, can handle input voltages of 380-460V AC, and supports a max output frequency of 500 Hz. The drive includes brake control and complies with EMC standards EN55011, Group 1, Class A.
Internal Product Review
195H3401 from Danfoss is an ideal module of industrialists as it gives optimal results by pairing an onboard display with a frequency inverter architecture to support precise motor control. Including brake control and side-by-side mounting capability help manage vertical loads and conserve cabinet space as well.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
Danfoss designed 195H3401 variant with display feature allows local parameter viewing and on-unit status checks during commissioning and fault diagnosis. Dynamic brake control allows controlled stopping and mechanical holding for vertical loads or fast deceleration tasks. Its maximum ambient temperature is 40°C (Full Load) which defines the upper environmental limit for continuous rated operation and guides cabinet ventilation requirements.
The availability of EMC compliance is EN55011, Group 1, Class A with RFI filter which limits conducted and radiated emissions for industrial locations. The motor’s cable length (std) of 40 m supports typical machine layouts while maintaining EMC performance without special screening. Further, its line frequency is 50/60 Hz and this matches common supply standards and enables global application compatibility. This frequency inverter provides variable AC output for speed control across loaded profiles. With an output power of 0.75 kW, it indicates rated mechanical power capability for matching small motors. Output power is 1 HP and presents nominal imperial power equivalence for system documents. The continuous output current of 2.4 A maintains conductor sizing and protection device selection for sustained operation.
The module 195H3401 displays input voltage as 380-460 V AC, three-phase which combines with industrial mains and sets insulation and clearance requirements for wiring. The maximum output frequency is 500 Hz to run high frequency operation for specialized speed ranges. Enclosure safety of IP20 requires installation inside a cabinet for protection against contact and solids. Built-in thermal drive protection is electronic which provides motor thermistor emulation and helps prevent winding overheating under prolonged loading. Side-by-side mounting requires no side clearance, thus enables compact panel layouts and increases usable cabinet density.
