195H3102

Product Description:

The 195H3102 from Danfoss fits inside the VLT 2000 Frequency Converters lineup and focuses on providing control and protection in a ton of everyday industrial settings. Single-phase setups benefit from the input voltage flexibility, working in the 208–240 V AC range. Rated output current reaches 3.1 A, making it compatible for small-drive motors that still need accurate speed tracking. Weight lands right at 2.0 kg, not bulky, so it slides onto panels or inside enclosures without hassle. Frequency output goes all the way from 0–500 Hz, which opens the door for a lot of variable speed or precision jobs.

Housing runs with IP20 protection, so the insides stay safe from accidental touches and some solid dirt. Extra features help out: there's built-in thermal motor protection stopping problems before they wreck the drive, and each frequency value can be programmed—from low output frequencies near zero, right up to either 120 Hz or 500 Hz. Commands stick and keep motors synchronized to whatever the task calls for. Power checks in at 1.3 kVA, and typical shaft output tags at 0.55 kW. Shifting between tasks or swapping drives doesn’t cause long delays due to the compact size and design choices.

Putting mounting ease front and center, the drive rests at 170 x 110 x 180 mm, so space gets used efficiently, especially in busy systems or where equipment gets stacked tight. The current rating in direct operation is 3.1 A, but for short pushes, the max output current can step up to 4.9 A (for 60 s). Standard phase configuration stays single-phase, not three, so wiring doesn’t get over-complicated and fits right in with light gear. In short, this Danfoss unit works where speed adjustment, motor health, and simple serviceability are all on the same checklist.