175B5056
Wake Industrial LLC is not an authorized distributor of this product.
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
-
In-Stock, Ships 3-5 Days
The 175B5056 frequency converter boasts a geometric displacement of 6.3 cm³/rev, a maximum outlet pressure of 100 bar, sound pressure levels of 76 dB(A), and weighs 4.4 kg (9.7 lbs). From the VLT 2000 Frequency Converters series by Danfoss, it handles media temperatures from 2–50°C and offers flow rates of 8.6 l/min at 1500 rpm and max pressure.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
Provided by Danfoss, this 175B5056 frequency converter has dangerous voltages with an active mains connection. The converter and the supporting motor must be placed near each other in a drive system. This product’s electrical parts cause injury or shock if they are touched immediately after the power is deactivated. The device doesn’t offer protection against motor overload with the factory setting. This unit’s Stop/Reset key on the keypad cannot be used as a safety switch. It should have a minimum distance of 100 mm clearance above and below it. The converter allows side-by-side mounting without spacing between them.
This product permits the installation of neutral grounding or error voltage relays in compliance with local safety and health standards for extra protection. The device’s control cables are screened to follow the highlighted EMC specifications. This unit’s screen for the serial communication cable must be installed using a screen clamp. Its brake cable length cannot exceed 5 m. The converter’s mounting is possible on an electrically conductive or non-conductive rear plate. This product complies with EMC requirements if it has an RFI filter. The device’s earth wire has to be secured in the associated earth screw. This unit requires some parameters to be programmed after its connection is established. Its connection must be done such that the converter can be controlled through the signal inputs at its top.
The frequency converter delivers infinite speed control of AC motors. This product uses a voltage vector control inverter control system. The device and the motor are adapted to each other through parameters. This unit features protection against transients from the mains. It has standard safety isolation.
Frequently Asked Questions about 175B5056:
Q: Where is the motor cable screening of the 175B5056 converter connected?
A: The motor cable screening of the 175B5056 converter is connected to a screen termination bracket in the converter.
Q: How is the 175B5056 converter cooled?
A: The 175B5056 converter is cooled by natural convection.
Q: What mounting style does the 175B5056 converter support?
A: The 175B5056 converter supports a panel mounting style.
Q: How is the 175B5056 converter programmed and controlled?
A: The 175B5056 converter is programmed and controlled using the control panel.
Q: How many lines does the display of the 175B5056 converter support?
A: The display of the 175B5056 converter supports three lines.
