NXP00385A5H1SSVA1AF0000C6 Danfoss
Wake Industrial LLC is not an authorized distributor of this product.
The NXP00385A5H1SSVA1AF0000C6 is an air-cooled drive manufactured by Danfoss. As part of the VACON NXP Air Cooled Drives series, it operates with a mains voltage of 380-500 V and has a nominal input current of 8.1 A. The drive features an enclosure class of IP20 and weighs only 2 kilograms.
Internal Product Review
The NXP00385A5H1SSVA1AF0000C6 is an air-cooled drive designed for industrial motor control. It features vector control for precise speed regulation, a 3-phase input voltage range of 380–500 V and a frequency range of 0–320 Hz. This drive is ideal for applications such as pumps, fans and conveyors, where reliable and efficient motor control is essential.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The NXP00385A5H1SSVA1AF0000C6 is an NXP series air-cooled drive that is built by Danfoss for industrial motor control applications. It operates on a 3-phase input voltage range of 380 - 500 V, at 50/60 Hz frequency and it delivers a rated output current of 38 A, with a frequency range of 0 - 320 Hz.
The NXP00385A5H1SSVA1AF0000C6 drive employs vector control to offer precise motor speed regulation for both sensor-less and encoder-based systems. Its standard I/O board features 6 digital inputs, 2 analog inputs and 1 analog output for seamless integration with other industrial equipment. It takes up to 5 sec of starting delay time and provides 3.6 kHz of switching frequency. This NXP drive offers 0.01 Hz of analog input resolution with 12 bits and its analog voltage is +10 V with an input impedance of 200 k Ohms. Its digital inputs support 18 to 30 VDC, while its auxiliary voltage is +24 V, ±10% with a maximum ripple of less than 100 mVrms and 250 mA. The unit has the option to add fieldbus communication boards, such as Profibus DP and Ethernet/IP for advanced communication needs. It is housed in an IP54-rated enclosure and at 5 to 150 Hz it possesses 0.25 G of vibration resistance. In terms of electromagnetic compatibility, the unit complies with category C2 standards under IEC/EN 61800-3 to ensure minimal electromagnetic interference.
The NXP00385A5H1SSVA1AF0000C6 drive is presented with 2 programmable change-over relay outputs with switching capacity for resistive load 24 VDC/8 A, 250 VAC/8 A, 125 VDC/0.4 A and a minimum switching load capability of 5 V/10 mA. It also incorporates several protective features that includes motor overload, short-circuit protection and fault detection. The drive has a graphical keypad for easy setup, parameter adjustment and fault diagnostics.
