080G0037 Danfoss
Wake Industrial LLC is not an authorized distributor of this product.
The Danfoss 080G0037 is a programmable controller from the MCX Programmable Controllers series. It provides 10 analog inputs, 6 analog outputs, 18 digital inputs, and 15 digital outputs, with a total output load of 92 Amps. The controller features a 128 x 64 dot LCD display, an IP40 front protection rating, and operates on an 85-265 Vac power supply at 50/60 Hz.
Internal Product Review
The 080G0037 is a Danfoss MCX programmable controller with 18 digital inputs and 15 digital outputs. A 128 x 64 dot LCD and IP40 front protection support clear local monitoring and dependable panel operation. Wide 85-265 Vac power supply capability makes the unit a strong choice for flexible industrial control.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The 080G0037 is a programmable controller produced by Danfoss for the MCX Programmable Controllers series. Designed for machine and HVAC supervision, the device executes user logic, collects field signals, and issues control commands to actuators in industrial automation systems. Its integrated display and communication port allow stand-alone deployment or networked operation with higher-level supervisory equipment. By combining power management, data acquisition, and sequence handling in one housing, it helps reduce panel space and wiring complexity.
The controller accepts 10 analog inputs for reading temperature, pressure, or position sensors and conditions each signal with internal 12-bit conversion. In addition, six analog outputs deliver proportional commands to valves or inverters, while 18 digital inputs handle contact-closure signals from devices such as limit switches or flow indicators. Command signals are distributed through 15 digital outputs that share a cumulative current capacity of 92 A to switch relays or solenoid coils directly. One RS485 port supports Modbus communication with remote drives or building networks. Supply flexibility is provided by a wide 85–265 VAC range at 50/60 Hz, and internal power consumption is limited to 26 VA, which simplifies cabinet thermal design. A front panel rated IP40 shields the electronics from intrusive particles.
For local interaction, a graphic LCD with 128 × 64 dots presents parameters and alarms within a 58 × 29 mm viewing window, allowing operators to navigate menus without an external HMI. Sensor excitation is built in: the 12 V rail can provide 12 VDC at up to 200 mA, and a separate 5 VDC output supplies 210 mA for potentiometric transmitters, reducing the need for discrete power modules. When the application requires pulse modulation, the controller drives loads across a range of 20 Hz to 1 kHz, supporting fan-speed or heater duty-cycle control. The operating temperature range is -20 to 60 °C for CE installations and 0 to 55 °C under the UL listing. The controller can be stored at temperatures between -30 and 80 °C without performance degradation.
