175G5226

Product Description:

The 175G5226 focus on the MCD Soft Starters line from Danfoss. The housing keeps a pretty compact shape and covers a lot of ground—in one frame is a rated motor power of 45 kW at 400 V AC. That motor output is backed up by the maximum rated current: 85 amps, which matches up with heavy-duty applications without dropping off when things ramp up. Rated frequency for operation sits between 45–66 Hz, so it gets used both in spots with steady power and in places where supply isn’t perfect. The form factor here really is about saving space, letting panels and enclosures stay neat without cramming too much gear together.

Protection doesn’t get overlooked because this starter makes use of IP20 degree of protection. That’s enough to keep fingers and tools out while staying ventilated inside more controlled building spaces. Startup settings include a maximum of 10 starts per hour, lined up for workflows that need frequent cycling but also steady protection for gear. The control supply voltage comes in at 24 V AC / 24 V DC with a +/-20% buffer, playing it safe for voltage swings. Users don’t have to wrestle with weight, either—out of the box, this MCD starter clocks in at 4.3 kg, so mounting doesn’t take extra hands or special hardware. A look at overall dimensions: 215 x 145 x 191 mm, keeps the install area tight.

Extra energy loss barely makes a dent because power loss at startup lands below 3 W/A and even standard operation stays under 4 W. Cooling takes care of itself without blowing up energy bills or tossing heat into the room. The quality and finish match up with industrial setups demanding automation that stays running across shifts.