175G5213

Product Description:

The 175G5213 soft starter from Danfoss sits in the MCD Soft Starters product group and works as a sturdy, three-phase solution for launching industrial motors without all the harsh jolts. The rated motor power tops out at 30 kW with 400 V AC feeds, and the rated current is 60 A, which gives enough of a push for midsize machines. The supply voltage range is 3x 200–440 V AC with a bit of wiggle room (+10%/-15%) for different factory setups. The weight is 2.1 kg and the dimensions run 203 x 98 x 163 mm, so this thing fits on tight panels with no drama.

Protection gets handled by IP20, so this unit stays covered from some sneaky fingers or dust, though nothing messy like hose water. Setup’s simple with the book format mounting style, meaning upright panels stay tidy and get more room for wiring under the hood. There’s 45–66 Hz for mains frequency, which keeps the starter running stable country to country. Settings are easy to tweak, and once in place, this soft starter keeps wear and tear in check by not slamming motors on and off. Maximum power loss stays low—under 3W/A for starts and under 4W when running, which helps keep the temperature reasonable during long days on the floor.

Connections allow for 110–230 V AC or 400–440 V AC on control voltage, all with reasonable tolerance for changing conditions. No special cooling kit required, so less fuss after installation. With the A-Frame size and precise three-phase control, this model fits automation, conveyors, and pretty much any spot where smooth motor starts save headaches on expensive gear. Reliability is on point, and with compact build and robust design, less downtime happens.