136G7338 Danfoss
Wake Industrial LLC is not an authorized distributor of this product.
MPN: MCD60069BT5S1X20CV1
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The Danfoss 136G7338 is a soft starter from the MCD Soft Starters series and is designed for three phase power applications. It features a nominal current of 69 A, rated insulation of 690 V AC, and supports a short-circuit rating of 80 kA. This device comes with an internal bypass, has a net weight of 4.9 kg, and is rated IP20 for protection.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The 136G7338 soft starter is produced by Danfoss within the MCD Soft Starters series. Designed for three-phase induction motors, it limits inrush current during startup and ramps voltage smoothly to reduce mechanical stress. That operating profile suits conveyor lines, pumps, and fans that need gentler starts and less disturbance on plant power systems.
The unit is rated for a nominal current of 69 A, allowing it to handle medium-sized motors on standard feeders. Control terminals accept 24 V AC/V DC power, and an input demand of only 8 mA allows direct signaling from many PLC outputs. An impulse withstand capacity of 6 kV helps protect the logic section against switching transients during normal industrial operation.
The enclosure carries an IP20 rating for panel-mounted use, and the analog monitoring circuit presents a burden of 600 Ω to keep transmitter loading low. Short-circuit endurance is verified at 80 kA, supporting robust protection planning in industrial panels. Danfoss recommends a maximum fuse of 100 A so protective devices remain matched to the starter’s thermal design.
Rated insulation of 690 V AC provides margin for industrial supply conditions, and a net mass of 4.9 kg keeps handling manageable during panel work. The internal bypass contactor reduces heat after acceleration, which supports efficient continuous operation once the motor reaches speed. Wake Industrial keeps this model in stock, offers same-day shipping on orders, keeps quotes valid for 30 days, and provides the chat tool available on the website for questions about type codes or fault indicators.
Frequently Asked Questions about 136G7338:
Q: What type of bypass is featured in the Danfoss 136G7338 soft starter?
A: The 136G7338 offers an internal bypass type, allowing for reduced power dissipation during operation.
Q: What is the nominal current rating for the 136G7338 soft starter?
A: This model is rated for a maximum nominal current of 69 A.
Q: What control voltage does the 136G7338 soft starter require?
A: The Danfoss 136G7338 operates with a control voltage of 24 V AC or 24 V DC.
Q: What is the IP rating of the 136G7338 from Danfoss?
A: The 136G7338 features an IP20 rating, providing basic protection against solid objects but no protection against liquids.
Q: What is the impulse withstand voltage for the Danfoss 136G7338?
A: The impulse withstand capability of this soft starter is 6 kV, enhancing its resistance to voltage spikes.
