4.95 based on 202 reviews

🙶 First-time customer with Wake Industrial. The ordering process was completely seamless. The part that we o... 🙷

132H8447 Danfoss

Ask for Availability

Preparing your secure checkout page...

The Danfoss 132H8447 is part of the MCD Soft Starters series and is designed for three phase power with a current rating of 124 Amps. This enclosed soft starter supports 120 VAC control voltage and operates at 480 V AC mains voltage. It features an internal bypass contactor, is rated for heavy duty service, and weighs 77 kilograms net with a NEMA 3R rating.

Warranty
Wake Industrial Warranty

Quote Request Form:

To contact sales for pricing and lead time:

Payment Methods

Visa
Mastercard
AmEx
Wire Transfer

Shipping Methods

DHL
UPS
FedEx
Freight

Our Credentials

Cary Chamber
DUNS Registered
SAM Registered
BBB Accredited

Product Description:

The 132H8447 is a soft starter produced by Danfoss within the MCD Soft Starters series. It is designed for three-phase power installations where controlled acceleration extends motor life. Installed between the mains supply and an induction motor, it ramps voltage smoothly during startup and deceleration, cutting mechanical shock and limiting line disturbances in automated machinery and pumping stations. By managing current electronically rather than through electromechanical contactors, it helps protect motors, gearboxes, and driven equipment while also reducing flicker on the distribution network. This operating method also helps reduce sudden torque changes that can stress couplings, belts, and piping.

The primary power path accepts three-phase mains up to 480 V AC, and the silicon-controlled rectifier stack is rated for a continuous line current of 124 A in heavy-duty service. That capability lets the unit start motors with a full-load requirement of up to 100 HP without exceeding its temperature limits. A separate control circuit at 120 VAC drives the gate electronics and status relays, keeping the control section isolated from the high-energy path. After the start sequence, an Internal Bypass Contactor closes to reduce losses, so the soft starter dissipates minimal heat during steady-state running. The bypass arrangement also helps limit heat buildup inside the enclosure during normal motor operation.

The starter is supplied as an enclosed assembly with a 3R enclosure rating, so it can be mounted outdoors where falling rain is expected but direct hose-down is not permitted. The sheet-steel cabinet encloses line fuses, control terminals, and the power electronics, bringing total shipping mass to 98 kg and a net installed weight of 77 kg. With cabinet dimensions that displace 371.082 L of volume, the unit requires adequate space in standard motor control centers. Its enclosed layout is suitable for installations that need a factory-mounted housing instead of a separate external cabinet.

Bypass Type
Internal Bypass Contactor
Control Voltage
120 VAC
Current Rating
124 A
Duty Rating
Heavy Duty
Enclosure Type
Enclosed
Gross Weight
98 kg
Mains Voltage
480 V AC
Motor Power
100 HP
Nema Rating
3R
Net Weight
77 kg
Phase Power
Three Phase Power
Product Group
VLT Soft Starter MCD
Volume
371.082 L

Frequently Asked Questions about 132H8447:

Q: What type of bypass contactor does the Danfoss 132H8447 soft starter include?

A: The 132H8447 features an internal bypass contactor for efficient operation during soft starter engagement.

Q: What is the duty rating of the Danfoss 132H8447 soft starter?

A: This model is designed for heavy-duty applications, supporting demanding motor starts.

Q: What is the control voltage specification for the 132H8447 soft starter?

A: The control voltage required for the 132H8447 soft starter is 120 VAC.

Q: What motor power and current rating are supported by the Danfoss 132H8447 soft starter?

A: The 132H8447 supports motors up to 100 HP with a maximum current rating of 124 A.

Q: What enclosure and NEMA rating does the 132H8447 soft starter have?

A: This soft starter comes in a NEMA 3R enclosed type, making it suitable for indoor or outdoor use with protection against rain.


Internal Product Review

  • ‘‘The 132H8447 MCD Soft Starter from Danfoss delivers excellent motor control for 100 HP three-phase power applications, with a heavy duty rating and an internal bypass contactor to optimize efficiency. Its enclosed NEMA 3R design provides reliable protection for demanding industrial environments. This model stands out for its combination of high current capacity and dependable motor starting performance.’’

Motion Industries logo
3M logo
IBM logo
Gexpro Logo
Caterpillar logo
NASA logo
Ford logo
Vallen logo