VACONX4C41000C Danfoss
Wake Industrial LLC is not an authorized distributor of this product.
MPN: X4C41000C
The VACONX4C41000C is a 75 HP drive from the Low Voltage VACON X Drives series by Danfoss. It supports 3-phase input, forced air cooling, and has a rated current of 96 amps with an overload capacity of 150 percent for sixty seconds. The enclosure has an IP66 rating and can withstand washdown pressures up to 1000 psi, with the unit weighing 43.1 kg and dimensions of 745 mm by 326 mm by 351 mm.
Internal Product Review
The VACONX4C41000C is a low-voltage drive designed for demanding motor control, with 75 HP output and 3-phase input. Forced-air cooling and an IP66 enclosure make the unit especially appealing for harsh industrial and washdown service. A 150% overload capacity for 60 s stands out as a strong performance advantage.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The VACONX4C41000C is an AC variable-frequency drive produced by Danfoss for the Low Voltage VACON X Drives series. It converts fixed-frequency plant power into a regulated output that lets controllers vary motor speed and process throughput in industrial automation. By adjusting voltage and frequency simultaneously, the unit maintains motor efficiency during acceleration, steady operation, and controlled deceleration.
This drive supplies up to 55 kW of continuous electrical power, which corresponds to 75 HP of shaft power when the drive is paired with a standard induction motor. A maximum output current of 96 A allows the inverter to handle full-load operating conditions, and its input section is designed for three-phase mains, eliminating the need for phase-conversion hardware. The drive tolerates short-term overloads of 150% for 60 s, providing additional capacity for startups or momentary process surges. Forced-air cooling moves heat across the heat sink fins. The airflow helps keep the internal temperature within operating limits at the stated current and power levels.
The housing carries an IP66 rating and withstands washdown cleaning pressures of up to 1000 psi, so the drive can be mounted directly on machinery in food-processing or chemical-production areas without an additional cabinet. The brake chopper circuitry engages at 776 VDC to dissipate regenerated energy, while an overvoltage trip at 814 VDC disconnects the load when line spikes exceed safe limits. Undervoltage protection activates at 397 VDC to prevent control loss during power dips. The cast enclosure uses frame size T4, measures 745 mm in height, 326 mm in width, and 351 mm in depth, and weighs 43.1 kg. Its enclosure dimensions support wall or machine-side installation where the forced-air cooling paths can remain unobstructed.
