VACONX4C40075C Danfoss
Wake Industrial LLC is not an authorized distributor of this product.
MPN: X4C40075C
The Danfoss VACONX4C40075C is a drive from the Low Voltage VACON X Drives series. It supports a motor power of 4 kW and has an overload capacity of 150 percent for 60 seconds. The drive features natural convection cooling, a rated current of 7.6 amps, and weighs 6.35 kilograms.
Internal Product Review
The VACONX4C40075C is a low-voltage Danfoss drive rated for 4 kW motor power with natural convection cooling. A rated current of 7.6 A and 150% overload capacity for 60 s support stable performance through demanding load changes. The 9-step program sequencer adds practical control flexibility, making this drive a strong choice for compact industrial installations.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The VACONX4C40075C is an AC variable frequency drive produced by Danfoss within the Low Voltage VACON X Drives series. It converts fixed-frequency input power into a regulated output that allows plant controllers to vary induction motor speed and torque, improving energy efficiency and process control in automated systems. The drive can be mounted directly on equipment or in a nearby panel. Its enclosure supports washdown and outdoor service, allowing placement near pumps, conveyors, or mixers to minimize motor cable runs and reduce exposure to electrical interference.
Continuous output is rated at 4 kW, while the motor phase current is limited to 7.6 A. For short overload events, the unit tolerates 150% for 60 s, providing additional starting torque for high-inertia loads. Protective logic responds to abnormal direct-current bus levels by tripping the drive at 814 Vdc and shutting it down below 397 Vdc. Dynamic braking engages when the DC link reaches 776 Vdc, routing excess energy through the braking circuit during rapid deceleration. The front-end controller provides five digital inputs and two relay outputs for commands, status signals, and basic equipment interlocks. A 9-step sequencer supports stand-alone speed profiles without requiring an external programmable logic controller for simple operating sequences.
The inverter uses natural convection for cooling, so airflow around the enclosure must remain unobstructed to keep semiconductor temperatures within operating limits. Its enclosure uses frame T1 and measures 306 mm high, 221 mm wide, and 166 mm deep. These dimensions help with equipment layout and provide the necessary space for the internal power and control components. The installation weight is 6.35 kg, which supports secure mounting on suitable equipment surfaces or panels. Pluggable control terminals simplify wiring by allowing control connections to be prepared and attached without disturbing the main power conductors. The integral brake chopper is housed inside the drive and controls current flow to the braking resistor, eliminating the need for a separate external chopper module during applications that require controlled deceleration.
