FCM307PT4C55STR1D0F00X400B341001D0495154

Product Description:

The FCM307PT4C55STR1D0F00X400B341001D0495154 belongs to the FCD 300 Micro Drives series from Danfoss and goes straight into work where small drives need to stand up to regular use. Power in this drive hits a typical shaft output of 1 HP / 0.75 kW, and the output current finishes out at 2.2 A. The input voltage sits at 3 x 380–480 V here, making it handy for mains found in plenty of industrial plants now. Rounding off power details, the unit stays efficient, clocking 96% efficiency, which helps keep electricity bills in check during long shifts.

This drive shows a 40 W power loss at max load which says something about how the internals are doing their job under stress. An IP66 / NEMA 4X (indoor) enclosure guards everything inside, blocking out dust and water jets. Sudden moisture or cleaning isn’t likely to take this drive offline. For wiring, maximum cable cross-sections are 4 mm² / 10 AWG for both motor and power lines, aiding setups where cables need a solid connection without fuss. Protection keeps going with max prefuse ratings of 25 A for IEC or UL, making sure both overload and short events stand less chance. In spots with limited space, this drive’s size works out since everything stays tight and compact.

Installers won’t run into much heavy lifting, either, as 5.8 kg total weight keeps jobs lighter. Thermal worries stay low thanks to well-sorted heat management—just 40 watts lost even on heavy workloads. The drive’s output covers most light-industrial movement, and the enclosure rating takes care of splashes in production areas where cleanup gets rambunctious. No extras are needed either; the protections and hardware built in mean everything shows up ready to run, not to mention maintenance teams will find it’s quick to access for any checks.