178B4503 Danfoss
Wake Industrial LLC is not an authorized distributor of this product.
MPN: FCD307PT4P66STR1DCF30T52C0
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
Current response time:
3 Minutes
23 Seconds
The Danfoss 178B4503 is part of the FCD 300 Micro Drives series and is designed for processing applications. It has a power rating of 0.75 kW and provides a shaft output of 1.0 HP. The drive features an IP66 enclosure rating, supports DeviceNet fieldbus, and operates at 3x380-480V.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The 178B4503 is a decentralized AC drive produced by Danfoss within the FCD 300 Micro Drives series. Classified as an FCD 300 product type, this wall-mounted unit is intended for processing machinery where onboard motor speed control reduces panel wiring and shortens the distance between the inverter and the motor. Installed close to the load, it regulates induction motors according to application demand while remaining linked to supervisory controllers through its embedded fieldbus. This layout supports distributed drive installation on conveyors, mixers, and similar equipment where cabinet space is limited.
The drive supplies a nominal power rating of 0.75 kW, so it can continuously deliver that output level to a connected motor under rated conditions. Its mains terminals accept 3 x 380-480 V three-phase input power, allowing direct connection to common industrial feeders without an external step-up stage. An IP66 enclosure protects the internal electronics against dust ingress and powerful water jets, making the unit suitable for washdown areas and exposed machine mounting. Communication with the host PLC is handled over DeviceNet, which carries setpoints and status through a single shielded trunk. To reduce conducted emissions, the drive includes a 1 A RFI filter that attenuates high-frequency noise from the motor cabling and helps limit interference with nearby sensors.
The unit includes a display connector that mates with the detachable keypad used across the series, allowing local parameter access without opening the housing. Mechanical output is listed as 1.0 HP, which aligns with the power range used by small pumps, augers, and similar processing loads. Electrical connections are routed through wall-mounted terminals with metric threads, which help support direct installation on the machine and keep conduit runs short. A standard coating on the aluminum chassis and circuit boards provides basic corrosion resistance in typical industrial environments. The remaining hardware uses standard series components, which keeps the overall configuration consistent with other FCD 300 units.
Frequently Asked Questions about 178B4503:
Q: What is the power rating of the Danfoss 178B4503 micro drive?
A: The 178B4503 drive features a power rating of 0.75 kW for efficient operation in various processing applications.
Q: What level of enclosure protection does the 178B4503 offer?
A: This model includes an IP66 enclosure rating, providing protection against dust and high-pressure water.
Q: Which fieldbus interface is supported by the 178B4503 drive?
A: The Danfoss 178B4503 is equipped with a DeviceNet fieldbus interface for straightforward network connectivity.
Q: Does the 178B4503 include an integrated RFI filter?
A: The 178B4503 drive comes with an integral 1A RFI filter to help minimize electrical noise interference.
Q: What voltage supply does the 178B4503 require for operation?
A: The voltage supply for this model is 3-phase 380-480V, suiting many industrial power systems.
