178B2136 Danfoss
Wake Industrial LLC is not an authorized distributor of this product.
MPN: FCD307PT4P66EXR1D0F00T00C0
The Danfoss 178B2136 is part of the FCD 300 Micro Drives series and has a power rating of 0.75 kW with a shaft output of 1.0 HP. This processing application drive is rated for 3x380-480V, comes with an IP66 enclosure, and includes an integral 1A RFI filter. The unit uses an extended hardware setup with 24V external supply and does not have a display or terminal box.
Internal Product Review
The 178B2136 is a Danfoss micro drive for processing applications with a 0.75 kW power rating. IP66 enclosure protection and 3x380-480V operation give the drive strong appeal for demanding industrial service. An integral 1A RFI filter adds clean electrical performance, making the package a very capable FCD 300 solution.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The 178B2136 is a decentralized AC drive produced by Danfoss within the FCD 300 Micro Drives series. The FCD 300 unit mounts close to the motor so that speed control and local I/O can be placed directly on the equipment. It is supplied with a standard factory coating that protects internal circuitry against moisture and airborne contaminants. Wiring enters through cable glands because the unit does not have a terminal box. The converter is suitable for conveyor sections or mixers that operate in washdown areas of a plant, where dust and water may come into contact with exposed equipment.
The drive accepts a three-phase input of 3 x 380–480 V, which is compatible with common low-voltage industrial power systems. Its continuous mechanical output is rated at 0.75 kW, corresponding to a shaft power of 1.0 HP. This power range is suitable for small induction motors used on auxiliary material-handling equipment. An IP66 housing prevents dust ingress and resists high-pressure water jets, allowing exposed installation without an additional cabinet. Because the inverter is mounted on the machine frame, the motor leads can be kept short. Shorter motor leads help reduce radiated electrical noise and simplify compliance with electromagnetic compatibility requirements.
An integral 1 A RFI filter attenuates conducted emissions so the drive can share power buses with sensitive instrumentation. The unit is supplied without a fieldbus interface, so network communication requires an external gateway or a separate communication interface. The housing has no integrated display, making a remote panel necessary for local interaction and parameter access. Extended electronics provide a 24 V auxiliary supply that keeps the control logic active during brief mains interruptions. For batching or dosing lines, the processing application profile provides preconfigured acceleration and deceleration ramps suited to controlled material flow. Cable-gland entry maintains the sealed housing while allowing power and control conductors to be routed directly into the drive.
