178B1592 Danfoss
Wake Industrial LLC is not an authorized distributor of this product.
MPN: FCD307PT4P66STR1DCF00T52C0
The Danfoss 178B1592 is part of the FCD 300 Micro Drives series and has a power rating of 0.75 kW with a shaft output of 1.0 HP. It operates on three-phase 3x380-480V supply, is rated IP66 for enclosure protection, and supports a frequency range of 0.2 to 132 Hz. This drive features a built-in display connector, an integral 1A RFI filter, and a wall-mount box with metric thread terminals.
Internal Product Review
The 178B1592 is a Danfoss FCD 300 micro drive with IP66 enclosure protection for demanding processing applications. Operation is impressively efficient at 96% and supports dependable speed control across a 0.2-132 Hz frequency range. The combination of three-phase 380-480 V input and a 0.75 kW rating makes the drive a strong choice for compact processing systems.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The 178B1592 is a decentralized AC drive produced by Danfoss for the FCD 300 Micro Drives series. Mounted directly on the machine frame, this wall-box unit controls three-phase induction motors used in conveyor lines and other processing equipment. By converting fixed mains power into variable-frequency output, it allows motor speed and torque to be adjusted without mechanical gear changes. Its decentralized arrangement places motor control close to the driven equipment, reducing the distance required for motor wiring. The compact enclosure is suitable for industrial automation systems that use distributed motor control instead of a centralized drive cabinet.
The drive accepts a three-phase supply of 3 x 380–480 V and delivers an adjustable output frequency of 0.2–132 Hz. Within this operating range, the controller maintains an efficiency of 96%, so only a small portion of the incoming energy is lost as heat. Under rated operating conditions, the input draws 1.9 A, while the inverter supplies a continuous output current of 2.2 A to the connected motor. These current values support the selection of suitable conductors and protective devices for the installation. The broad frequency range allows the drive to operate motors at low speeds or accelerate them for higher-throughput processing without changing the mechanical transmission.
The molded housing has an IP66 rating, protecting internal components from dust and powerful water jets during washdown procedures. Continuous shaft power is limited to 0.75 kW, making the drive suitable for smaller motors used in conveyors and distributed processing equipment. Internal switching components dissipate approximately 40 W while the unit delivers its rated output, so the mounting location must permit heat to escape from the enclosure. An embedded EMC network uses an integral 1 A filter to reduce conducted electrical interference at the machine boundary. The unit also has standard coating, standard hardware, and metric-thread wall-mount terminals that support secure installation and organized cable entry. A display connector provides access to local operating information and parameter controls. The drive has no fieldbus option, so commands and status signals are handled through standalone or hardwired control connections.
