130B1210

Product Description:

The 130B1210 module from Danfoss lands in the Danfoss Cables and Accessories series and goes to work inside motion and automation builds using FC 301 or FC 302 drives. This part is made mainly for Slot B compatibility, giving more output control without changing anything complicated in the drive. The piece has a coated construction which helps out where electric noise or bits of metal dust hang around. Drop-in installation keeps labor low, which matters when time gets squeezed.

Inside, module outputs add extra flexibility. There are three relay outputs built in, pushing this block into uses where one or two relays just can’t keep up. Loads get handled fine with max AC-1 resistive at 240V AC 2A but the module also keeps pace on the DC side with 240V DC 1A at DC-1, letting engineers run a wide set of gear. Tough spots are less worrisome since the minimum terminal load sits at DC 5 V 10 mA, so finicky low-current signals get picked up properly. Switch rates take on different needs — 6 min⁻¹ for rated loads and 20 s⁻¹ for smaller jobs — so cycling can go as fast or slow as the system requires.

Build is aimed at hassle-free function. That coated finish steps in for protection, especially in panels or cabinets where dust drifts, or moisture is a once-in-a-while thing. It keeps relays working freely and cuts down on emergency shutoffs. This block takes its spot in places pushing industrial controls, machine lines, or food processing packaging lanes, handing off reliable switching and worry-free control. Space held inside a module volume of 3.723 dm³ is just right for tight control enclosures, giving big output while fitting small footprints.