130B1120

Product Description:

The Danfoss 130B1120 belongs to the Danfoss Cables and Accessories series and brings a practical design that just fits with demanding drive installations or wiring layouts. Sitting at the core, this cable accessory is rated for a continuous output current of 73 A when used from 380 to 440 volts. Sometimes bigger drives or larger machines pull high currents for long periods, and this accessory matches that need smoothly. The maximum input current of 66 A puts it well inside the serious range for industrial wiring setups. One key plus here—as far as typical cable attachments go—the maximum cable cross-section comes in at 50 mm² (1 AWG), so those heavier gauge cables slide right in without a problem, and the same rating stands whether setting up for IP20 mains, motors, or disconnecting tasks.

Build and durability are clearly handled with care, since a claimed 98% efficiency is advertised and the system comes shielded in different enclosures, including IP21 C1, IP20 C3, plus IP55/IP66 C1 choices. These cases cover a lot of ground in real installations—sometimes shops, sometimes clean rooms, sometimes messy work floors. Intermittent ratings shift upward, meaning for short heavy loads the accessory pushes current as high as 80.3 A at 380–440 V, or 71.5 A at 441–500 V. Drive cabinets or larger equipment rigs really benefit from these stronger highs, especially during startup surges or process peaks.

Set up is meant to make things easy; the sizing ensures cables up to 50 mm² work in nearly any compatible slot, and the main performance figures—power loss at max load topping at 698 W, strong enclosure variety, and support for 441–500 V continuous with 65 A—give a lot of flexibility for electrical and automation engineers to build around, swap, or troubleshoot.