080Z4001

Product Description:

The 080Z4001 shows up as a panel-mounted unit by Danfoss, set inside the Danfoss Cables and Accessories selection. Size stands at 295 x 65 x 235 mm, which sits nicely on a panel without blocking space for other gear. This device doesn’t give trouble when it comes to voltage range—operating between 100-240 V AC—so swapping it into sites with different power setups turns out easy. The IP rating shows up as IP20, so dust doesn’t bother it in regular indoor places. As for temperature, the whole unit deals with everything from -10°C to +55°C, meaning a lot of storage rooms or tool shop environments can run this part without fuss.

What also pops out: this 080Z4001 unit is pretty flexible for automation. It connects with Modbus, RS485, LON RS485, and Ethernet IP lines—each useful for their own control schemes. The total device support caps at 120, so if there’s a site with lots of chilled cases or sensors, the unit keeps networks under one handle instead of splitting things up. Slotting it into a cabinet goes neat with panel mounted as the fit. A display sits inside as Internal (Front Display)—easier for someone to scan status or check numbers without needing extra hardware. Two digital outputs come standard if there’s need for basic signals, like triggers for alarms or system switches.

This accessory does work well as the command piece in shops, warehouses, and plant automation, where setups shift around sometimes and one point should stay in charge. Measurement tolerances get handled tight, and connections use industry-fit screw terminals and Ethernet jacks for less headache during install. The tough build copes with everyday bumps or open-door use most control cabinets see. Each supported protocol helps with updating firmware or reporting device counts—handy for maintenance.