082H5006 Danfoss
Wake Industrial LLC is not an authorized distributor of this product.
The Danfoss 082H5006 is part of the Analog and Electric Actuators series and has a closing force of 300 Newtons with a maximum stroke of 5.5 mm. The actuator features an IP54 enclosure rating, operates at a supply voltage of 24 VAC, and consumes 9 VA of power. It weighs 0.8 kg and has a manual override hex size of 6 mm.
Internal Product Review
The Danfoss 082H5006 is an electric actuator designed for dependable control service with a 24 VAC supply and 9 VA power consumption. An IP54 enclosure rating and 300 N closing force give this unit strong suitability for demanding HVAC and fluid control installations. Spring-up safety action is a standout feature for fail-safe operation.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The 082H5006 is an electric actuator manufactured by Danfoss within the Analog and Electric Actuators series. It is intended to drive small control valves or dampers so that automation systems can regulate flow or pressure without manual intervention. By converting low-voltage control signals into linear motion, the device supplies precise positioning force for building services and light industrial installations. Its compact design supports installation in applications where available space around the valve or damper is limited.
The actuator operates from a control supply of 24 VAC, and the circuit tolerates voltage variations of +10/-15% to accommodate line drops. Electrical demand peaks at 9 VA, allowing multiple units to share a modest transformer when the supply is sized for their combined load. Its drive train generates a closing thrust of 300 N, providing sufficient force for tight shutoff against seat pressure. Motion is available across a maximum stroke of 5.5 mm, which accommodates the travel range of compatible control valves. At a 50 Hz supply frequency, the spindle advances at 11.75 s/mm, providing predictable travel time for time-proportional controllers. The actuator is also compatible with 60 Hz supplies, and its average operating speed changes to 14 s/mm at that frequency. A spring-return mechanism raises the stem when power is removed, moving the connected valve to its fail-safe position.
The enclosure has an IP54 protection rating, shielding internal components from limited dust entry and splashing water in mechanical rooms. Wiring enters through an M16×1.5 cable gland, which provides a secure path for the electrical conductors. The body is fixed to the valve with a mounting nut that should be tightened to 6 Nm to support proper load transfer. A 6 mm manual override hex allows the valve to be positioned without electrical power, simplifying adjustment and service work. The assembly weighs 0.8 kg, which limits the mechanical load placed on lightweight valve bonnets. These features allow the actuator to be installed in common indoor control applications without requiring a large mounting area or heavy structural support.
