082G3011 Danfoss
Wake Industrial LLC is not an authorized distributor of this product.
The Danfoss 082G3011 is part of the Analog and Electric Actuators series and is designed for control with a 3-point signal at a supply voltage of 230 Vac. It offers a closing force of 450 N, a maximum stroke of 10 mm, and can handle medium temperatures up to 150°C. The actuator features an IP54 enclosure rating and weighs 1.4 kg.
Internal Product Review
The 082G3011 is a Danfoss analog and electric actuator built for dependable valve control with a 3-point control signal and 230 Vac supply. Operation remains efficient with 7 VA power consumption and IP54 enclosure protection, supporting consistent industrial service. A 450 N closing force makes this actuator a strong choice for stable process actuation.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The 082G3011 electric actuator manufactured by Danfoss belongs to the Analog and Electric Actuators series. Designed for valve automation, it converts electrical drive signals into linear travel so that control valves within heating, cooling, or process circuits receive precise stem positioning. By handling the mechanical movement externally, this actuator lets PLCs and building management systems regulate flow or pressure without manual intervention.
The actuator operates from a single-phase mains input of 230 Vac, drawing only 7 VA during motion, which keeps panel transformer sizing minimal. Commands are handled through a 3-point control signal that moves the stem inward or outward depending on which control wire is energized. Internally, the drive electronics synchronize with plant power at the standard 50/60 Hz line rate, and the spindle advances at a rate of 3 s/mm, allowing predictable response-time calculations during loop tuning. Two M16 × 1.5 cable entries accept armored conduit for power and signal segregation, while a digital end-position output on terminals 4 and 5 provides a voltage-free contact that indicates when full travel is reached. The design includes no dedicated safety function, so any fail-safe behavior must be implemented externally.
A mechanical closing force of 450 N is available, enabling the device to seat resilient or metallic plugs without auxiliary gear trains. The spindle delivers up to 10 mm of linear stroke and is enclosed in a housing rated at IP54, protecting live parts against dust deposits and water splashes typical of plant rooms. Continuous service is supported at media temperatures as high as 150 °C, so the actuator can be mounted directly on steam or hot-water valves without an extension kit. The assembled weight of 1.4 kg facilitates installation on small valve bodies. The absence of an internal spring return keeps the form factor compact while requiring external logic for positioning confirmation.
