082G3007 Danfoss
Wake Industrial LLC is not an authorized distributor of this product.
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The Danfoss 082G3007 is part of the Analog and Electric Actuators series and operates with a supply voltage of 230 V AC and a power consumption of 2 VA. It delivers a closing force of 450 N, has a maximum stroke of 10 mm, and supports a control input of 3-Point. The actuator provides an IP54 enclosure rating, can withstand medium temperatures up to 150 °C, and weighs 1.4 kg.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The 082G3007 actuator is produced by Danfoss within the Analog and Electric Actuators series. It is designed to drive small control valves so that flow or temperature can be modulated automatically in building services and light-industrial systems. By converting electrical commands into linear motion, the unit positions a valve stem with repeatable accuracy for closed-loop regulation.
The actuator is powered by a supply of 230 V AC; this mains voltage removes the need for external transformers in typical plant rooms. A 3-point control input lets a controller send separate open and close signals, simplifying wiring in relay-based installations. Electrical demand is low at 2 VA, so multiple actuators can share a single circuit without overloading it. The spindle exerts up to 450 N of closing force, enabling tight shutoff against valve seats even when differential pressure is high. Travel speed is rated at 15 s/mm, meaning the full 10 mm stroke is completed in about 150 seconds; this slow movement minimizes water hammer and permits precise valve positioning.
The housing carries an IP54 rating, guarding the internal mechanism against limited dust ingress and splashing water in mechanical rooms. It tolerates media temperatures as high as 150 °C, allowing installation on steam or high-temperature water valves without thermal isolation. Stroke length is mechanically limited to 10 mm, matching the travel of compatible valve stems and preventing overextension. With a mass of 1.4 kg, the actuator can be mounted directly on pipework without heavy support brackets. Two M16 × 1.5 cable entries provide separate routes for power and feedback wiring, and an end-position signal contact is included for position verification. The built-in manual override allows the stem to be moved when power is unavailable. Operation is possible on 50 Hz or 60 Hz grids, and the product falls under Protection Class I for safe grounding. The actuator does not have a spring-return mechanism, so the valve remains in its last position during a power loss.
